genepires

got some books that I want to sell. All are in great shape. may have some highlighting. performance rock - goddard/newman mixed climbing - Isaac alaska climbing guide - wood/coombs north cascade rock - burdo thinking $5 each. a kong magic fairly (lightweight) helmet. lightweight for 2005 standards. $15 photos below, some of the stuff in photo sold already. will meet or ship if you pay actual shipping costs. PM me.

that voice was silenced by raging fear.

If the snow is hard enough for a vertical placed picket to be worthy, it is very unlikey that your partner punched through a hidden crevasse. Of course there is a chance that your partner could trip over themself and fall in a open one. But chances are if you are placing gear for crevasse rescue, the snow is soft and weak and therefore it should be deadman placed. With that in mind, I still place my picket with the sling on the top hole cause it is hard to pull of the pack with it girthed to the middle hole.

10 coils should be around 40ft each which would leave 85 ft between climbers. In alaska this might be needed but the cascades don't require that much space between climbers. Just more chances for slack and rope stretch to make a small fall into a large fall. With a couple knots between climbers and 50 feet between will give you 57 feet of rescue coils each. Being on a dynamic line is preferred over skinny static, granted the snow is forgiving. If you wanna rap on 6mm, even doubles over, then it is your call. Lockers go on whever it is the sole connection to a anchor, either on puropse or during the accident.

from Cliff Mass weather blog. about very cold temps in oregon. Maybe oregon ice climbers should be poking around this area in the winter?

It would take an ice layer to prevent a picket from not going down fully. No reason to think that will happen around the second hole point. More often than not, it goes in fully so you would have to change it to the top postion or go with the weaker less than full depth. the waist loop length is really about trying to do 2 things. 1.From a self arrest position with a picket already placed, I take my waist prussik which is already on the rope and attach it to the buried picket. this is easier with a longer prussik. 2.When I need to move to the lip of the crevase, I protect myself by using my waist prussik which is attached to the fixed rope. A short one would be crazy hard to move back and forth. what length of rope and spacing do you use? a 50m rope with 40 feet between climbers leaves 60 feet of coils used for rescue and rappeling. If you are using a 30m rope but both climbers need to carry 50ft of cord to help with rescues, maybe a rethink of the rope choice is in order. rapping down with a 6mm rope is not trivial, especially when you think about the cutting in the snow of the thinner line and the friction needed to go down and how will you get back up. One good reason for a extra cord is for some other kinds of mech advatage pulley systems. I think there is some kind of efficient 7:1 system utilizing a cord on the end of the z system. I saw it once but never really tried it.

you can't wipe your stinky ass with a kindle. well maybe you can, but you can't make a fire with a kindle. you could have a picture of a fire though.

why girth hitch the second hole and not the top hole? waist prussik should be longer than usual prussiks. how long is your waist prussik? 2ft loops work good for waist prussiks. why carry 50ft of cord when you can use the extra rope for the C portion of ZC?

amazing! such clean granite and good times.

Darin and I were above you on the face that day. we came in on the side access ledge. that moat looked very large from our perspective. Either I am old or you gals can handle the colder temps. I thought it was way too cold for bikinis! It has been a while since either Darin or I have climbed in a bikini.

yes sir. tie the knot in the middle must have some positive rational that I am not aware of yet. must be part of some newer guides practice or something. I am curious. maybe tie a knot in the middle and the end?

I tie a knot in the sling (near the end) so that I can clip the biner (on the end) to the opposite end of the picket. it just keeps things tiddy. this allows you to carry the picket easily over the shoulder, crosswise across the body. locker is for the chance that you will need to clip a person onto the one picket. amongst other reasons too.

if the rope climbs upwards, you will need something to keep you from sliding downwards attached to the rope. prussik, ascender, ect if the fixed line goes horizontal, you can clip to the fixed line with a tether. (daisy chain, shoulder length sling, ect) You will need a way to get to the other side or up the rope if the rope sags down into the crevasse. The length of your tether may make getting across very difficult if long. But a short tether makes it awkward to move. Find the middle ground. something to think about is the shock load if you fall onto the horizontal fixed line. if the rope is a static line, it seems like there would be tremedous forces onto the rope and anchors. (Better off with a dynamic line) if the line is too taut, there would be high forces once again for both kinds of rope. I have never seen or used a horizontal fixed line so I have no real expertice with that. Just something to think about.

just in time to go to work!

damn that is crazy.

should I put a piece of tape over the computer camera?

south ridge of ingals pk. (near stuart pk)

if you can drive to eldorado TH, climb eldorado! how about getting up on mt baker?

The same year tibloc came out, I heard of a guiding fatality in the alps attempting exactly what you describe here, and remember a notice coming out from Petzl to specifically NOT use a tibloc in this manner. Like it's been mentioned before, no ascender is intended to catch dynamic loads of any sort, and toothed ascenders will threaten to tear the sheath and possibly cause the rope to fail. thanks for sharing Chris. that is the kind of news that needs to get spread around to everyone. luckily I never had enough of those things to get into trouble.

try using a bachmann hitch next time.

In the photo, they were already started cleaning it off. Would not be suprising if they get it cleared off by the weekend. It is not like that monster rock fall near newhalem some years back. that was MAJOR.

PM sent on rock shoe.

no jab meant towards the mammut rope. I just thought my wording was implying that I thought mammut ropes were the best for glacier ropes when what I meant was that any double 50m was the best for glacier ropes. I have never owned a mammut rope but I am sure that they are great ropes as most of their stuff is great stuff. they prolly don't want their glacier ropes (or any double/twin line) used as a single for the reason that those ropes are more prone to being cut over an edge. Hence the need for two strands. There are very little cutting edges on a glacier and the forces are considerably less, so you can get away with using it in a single fashion. This is true for all rope manufacturers.

noticed something to consider for single person rescue situation. if the weight is being held by the micro trax, you would not be able to take it off your harness and clip it to the snow anchor. you would have to clip the picket sling to your locker, ease off and hope that you clipped it in a location that you can get yourself out of that locker. If your micro trax locker was clipped directly into the belay loop, this would be even more difficult. that micro trax seems like a very efficient and light piece of gear though. perfect for glacier travel rescue.

I don't want to speak for how keenwash uses microtraxions during simu-blocks, but there was a technique for using tiblocs in simuclimbing. The tibloc is placed on the gear so that when the second person falls, the force is not pulling on the lead climber but right onto the gear. If the first person falls, it becomes a standard simu fall. Maybe he is using the micro in the same way, not on his harness.