EWolfe Posted November 5, 2003 Posted November 5, 2003 What kind of 'biners do folks like? Ease of clipping, weight being the most important factors. I have a lot of hotwires that I like, and was thinking about replacing the ovals for racking gear with some oval wiregates. Anyone used them? Other good 'biners? Discuss. Quote
whirlwind Posted November 5, 2003 Posted November 5, 2003 personaly i like the d's better than ovals easer to clip and most are rated to take more load somthing 5 or so kn more also its not such a big deal but they dont spin when u try to clip em like the ovals due Quote
Dru Posted November 5, 2003 Posted November 5, 2003 MisterE said: What kind of 'biners do folks like? Ease of clipping, weight being the most important factors. I have a lot of hotwires that I like, and was thinking about replacing the ovals for racking gear with some oval wiregates. Anyone used them? Other good 'biners? Discuss. i like those dmm wirelocks cause they are sexy beasts like me. Quote
kurthicks Posted November 5, 2003 Posted November 5, 2003 i like the trango light wiregates, they're the same wieght as neutrinos (36g) but are full size. easier to clip with gloves on. Trango just came out with a full strength, full size biner at 30g. the Superfly for racking stoppers i like petzl spirits as there's no notch to fight with. Quote
EWolfe Posted November 5, 2003 Author Posted November 5, 2003 wazzumountaineer said: i like the trango light wiregates, they're the same wieght as neutrinos (36g) but are full size. easier to clip with gloves on. Trango just came out with a full strength, full size biner at 30g. the Superfly for racking stoppers i like petzl spirits as there's no notch to fight with. Isn't there another one without the notch, that has a twist in the wire with a ball and slot at the end? Quote
Dru Posted November 5, 2003 Posted November 5, 2003 MisterE said: wazzumountaineer said: i like the trango light wiregates, they're the same wieght as neutrinos (36g) but are full size. easier to clip with gloves on. Trango just came out with a full strength, full size biner at 30g. the Superfly for racking stoppers i like petzl spirits as there's no notch to fight with. Isn't there another one without the notch, that has a twist in the wire with a ball and slot at the end? thats the freaking dmm wirelock Quote
EWolfe Posted November 5, 2003 Author Posted November 5, 2003 Dru said: MisterE said: wazzumountaineer said: i like the trango light wiregates, they're the same wieght as neutrinos (36g) but are full size. easier to clip with gloves on. Trango just came out with a full strength, full size biner at 30g. the Superfly for racking stoppers i like petzl spirits as there's no notch to fight with. Isn't there another one without the notch, that has a twist in the wire with a ball and slot at the end? thats the freaking dmm wirelock Hell, Dru. If ya did more than post silliness about them, maybe it would be more obvious. Quote
RuMR Posted November 5, 2003 Posted November 5, 2003 Dru said: MisterE said: What kind of 'biners do folks like? Ease of clipping, weight being the most important factors. I have a lot of hotwires that I like, and was thinking about replacing the ovals for racking gear with some oval wiregates. Anyone used them? Other good 'biners? Discuss. i like those dmm wirelocks cause they are sexy beasts like me. Yeah, you got that right...all scrawny, twisted w/ a ball trapped in their crack! Just kiddin' Quote
EWolfe Posted November 5, 2003 Author Posted November 5, 2003 RuMR said: Dru said: MisterE said: What kind of 'biners do folks like? Ease of clipping, weight being the most important factors. I have a lot of hotwires that I like, and was thinking about replacing the ovals for racking gear with some oval wiregates. Anyone used them? Other good 'biners? Discuss. i like those dmm wirelocks cause they are sexy beasts like me. Yeah, you got that right...all scrawny, twisted w/ a ball trapped in their crack! Just kiddin' Quote
scott_harpell Posted November 5, 2003 Posted November 5, 2003 WC adonized wiregates... nto sure of the name, but i got a dozen for $6 a piece in Whistler. WTF? and they clip smoooth and are light as faq! Quote
murraysovereign Posted November 5, 2003 Posted November 5, 2003 This could be a first - cc.com has actually helped me get work done. I had completely forgotten that my DMM order for next Spring had to be done by midnight tonight, but this thread reminded me - thanks dru . Quote
murraysovereign Posted November 5, 2003 Posted November 5, 2003 DMM makes shoes now, too? Jeez, I can't keep up anymore... Quote
Lambone Posted November 5, 2003 Posted November 5, 2003 The new Oval Wire gates are pretty cool. If you are buying alot of extra biners for aiding I think they are worth it, you will get more biners for the $. Ovals have some huge benefits in some cases (racking pins, tieing clove hitches, the gaurda knotbrake rappel...etc), but for the emost part I like nutrinos. This should be in the Gear Critic... Quote
cracked Posted November 5, 2003 Posted November 5, 2003 Due to my big hands, I LOATHE neutrinos....I've used em a few times and I cannot operate the gate. NO WAY. I'm using Hotwires, they might be slightly heavier, but at least I can clip. Quote
Crux Posted November 5, 2003 Posted November 5, 2003 DMM ProWire As light as Neutrino but with larger profile, easier to grab esp with bigger hands; has a 'hook' for the gate to engage (unlike the ball-and-socket of the DMM WireLock), but the hook is sleek and thereby less prone to snagging; the WireLock gate socket reported to sometimes get goobbered up in ice and slop, is PITA then. Trad hook of the ProWire stays clean; thus, did not get WireLock; do like ProWire. 37gm. Can't beat for the weight. Nice feel to the closing gate. Is good. Quote
EWolfe Posted November 5, 2003 Author Posted November 5, 2003 Crux said: DMM ProWire As light as Neutrino but with larger profile, easier to grab esp with bigger hands; has a 'hook' for the gate to engage (unlike the ball-and-socket of the DMM WireLock), but the hook is sleek and thereby less prone to snagging; the WireLock gate socket reported to sometimes get goobbered up in ice and slop, is PITA then. Trad hook of the ProWire stays clean; thus, did not get WireLock; do like ProWire. 37gm. Can't beat for the weight. Nice feel to the closing gate. Is good. Should be good for Cracker - hs hands are big, so the offended women say... Quote
erik Posted November 5, 2003 Posted November 5, 2003 DOESNT THE BALL AT THE END OF THE DMM WHATEVER INCREASE THE MASS OF THE GATE THUS ELIMINATING ANY BENEFIT OF THE ACTUAL WIRE GATE? NEUTRINOS IS ABOUT ALL I USE. AND SOME KEYLOCK BINER FOR ASSORTED USES. Quote
iain Posted November 5, 2003 Posted November 5, 2003 the problem with neutrinos for me (I have some of their draws) is I try to save them for easy clips on sport routes, so I waste energy fumbling for them to get rid of them at easy clips. If you can't tell by now I'm a headcase. Quote
iain Posted November 5, 2003 Posted November 5, 2003 I have mostly quickwires, and they seem to work well for just about anything. Quote
minx Posted November 5, 2003 Posted November 5, 2003 neutrinos...guess having small hands is good thing. i never have probs w/the gates on those. picked up a couple of the DMM w/the twisted gates. don't really like them that well. maybe i'm just not used to them but that twist sorta feels funny to me. Quote
Dru Posted November 5, 2003 Posted November 5, 2003 i really like the wirelock. i think that ball doesnt increase gate mass much but i haven't taken a big whipper on them either so what do i know. Quote
bunglehead Posted November 5, 2003 Posted November 5, 2003 iain said: I have mostly quickwires, and they seem to work well for just about anything. Quick wires: And those new little locking biners by BD are awesome. Throw in a couple of nice pear shaped lockers for harness work, and some locking ovals for general rigging, and you're good to go. Quote
chelle Posted November 5, 2003 Posted November 5, 2003 Spirits and neutrinos. Are there other carabiners out there? Quote
randygoat Posted November 5, 2003 Posted November 5, 2003 I've been replaceing my old biners here and there with wire gates, mostly because I do alot more ice than rock climbing and the wire gate gates don't freeze up as bad. I have mostly Dovals[ OP?] and Hot Wires, plus a mixed bag of strays . What ever that is available when I have the cash to spend. Mixing the new light wire gates with the new thin runners by Mammut[like a shoe string ] is shaving some real weight from my old[ancient?] rack. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.