Jump to content

Recommended Posts

Posted

What's the deal with Gore-Tex? What really happens if you don't use the fancy GoreTex wash stuff? It seems if the stuff is that tough, it shouldn't break down when you wash it like every other piece of clothing you own.

 

sorry if this has already been covered.

 

--eternal

 

bigdrink.gifbigdrink.gif

  • Replies 26
  • Created
  • Last Reply

Top Posters In This Topic

Posted

I wash my goretex in normal detergent and have never had a problem. One thing is to use powdered detergent, NOT liquid, as the liquid tends to clog the membrane and reduce the breathability, or so I am told.

Posted

The Gore-Tex won't break down, but you might screw the waterproof coating on the nylon. Nylon is hydrophilic, and once the coating gets washed away (or funked up with body oils, dirt, etc.), you get wet.

I don't think you need to use soap any more special than liquid detergent (though I've used powdered). Then throw your stuff in the dryer, and monitor is closely. The heat sorta reactivates the waterproof coating. Even a quick ironing can help.

Posted

I usually run it through a second cycle with no soap. This seems to help.

 

I was told that soap is hydrophyllic, and so you wanna get rid of as much of it as possible. SOme people also do this with their polypro and socks too. I think that's a bit over the top.

 

They should get rid of thier stinky polypro and wear wool. Much cosier. Seriously.

Posted

Of course soap is hydrophilic, that's how it works!!

 

Wash as directed above, iron on lowish heat, and if that doesn't work, get a bottle of the spray-on Revivex, follow directions on bottle. One bottle does one jacket. Stuff works wonders.

 

 

Posted
Wash as directed above, iron on lowish heat, and if that doesn't work, get a bottle of the spray-on Revivex, follow directions on bottle. One bottle does one jacket. Stuff works wonders.

 

 

Definately spend the few extra $ and get Revivex not the TxDirect stuff. It works so much better and lasts a lot longer than other DWR sprays/washins.

Posted

Use a sideload washing machine more gentler on jacket.

To restores the water-repellent finish, i'm now using 3M Scotchgard. Works well on everything, jacket, backpacks even fleece.

 

Erick

 

Posted

The ingredients of Scotchgard are a secret. As Dru suggests, I wouldn't be afraid to use it on a coated nylon tent piece, though it may not stick to SilNylon.

 

Despite claims by Scotchgard that it doesn't mess up the breathability of DWR fabrics, I would not trust my Goretex to it, especially since there is a product out there specifically for DWRs, that is, Revivex.

 

I thought Scotchgard was being pulled off the market for being carcinogenic, anyone know what happened with that?

Posted
Have you tried it? It beads up the water just all the others.

 

I would think Scotchguard would prevent the gore-tex from breathing.

 

Also, you guys keep spouting hydrophilic around, but as far as i can tell, that only means something that has a strong affinity to water. Can someone describe in detail how spraying something on a jacket make it more waterproof AND breathable? I understand the jacket is loaded with tiny holes and that makes it breathable...but wouldn't spraying a coating of say Scotochguard just clog up the holes? I could understand a dryer melting the jacket enough to clog the holes too, or soap not dissolving enough to clog the holes as well.... argh, sorry, it's the geek in me.

 

--eternal

 

less talk, more bigdrink.gifbigdrink.gif

Posted

I think one of the reasons that a DWR coating helps breathability is that it keeps the fabric from wetting out. When the fabric wets out the moisture now contained in the fabric acts as a barrier to vapor escaping. By using a DWR, the water, for the most part, will roll off,leaving the fabric to breath as it's designed to. Just my guess tho. bigdrink.gif

Posted
Have you tried it? It beads up the water just all the others.

 

Yeah...and I could spray Krylon on my jacket and it would work just as well. moon.gif

 

I haven't noticed a considerable advantage using Revivix over TX-Direct...I still need to reaplly it at least two or three times a season. The wash in stuff makes it so much easier though.

Posted (edited)

I haven't notice a change in breathability after applying scotchgard. What I have noticied is that my jacket is lighter and dryer because its not wetting out.

 

If you really want to know whats in scotchgard here, is a link to pdf file from 3M.

scotchgard

Edited by EJohnson
Posted

Hey EJohnson, I'm inclined to agree with you about Scotchgard. I like the shit. Used to spray it on my sofas when I had cloth and nothing nasty would stick to it. I've also used it on my gortex shit with no apparent loss of breathability...course I don't think the shit breathes anyway. My opinion...there's allot of "voodoo" about this and that miracle product. I don't buy it.

  • 4 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...