John Frieh Posted December 25, 2005 Posted December 25, 2005 Shopping for a portable gas powered drill for concrete and rock... Best Brand(s)/Model(s)? Reqs? Weight is a concern but not critical. Quote
scott_johnston Posted December 25, 2005 Posted December 25, 2005 One of our Mazama locals has a gas Ryobi that kicks ass on my Bosch Annialator. Downsides are that the hot muffler WILL burn your arm and MUST be kept away from the rope. Up sides: It is very powerfull. With a new bit it will drill 20 holes on a pint. My Bosch takes two batteries for the same. Long body so it makes for awkward drilling stances in an already awkward activity. Big down side is that I have heard it is not made any longer so look for it in surplus tool stores. Good luck, Scott Quote
MisterMo Posted December 26, 2005 Posted December 26, 2005 Punjar (sp?) is the shit for dyanamite sized holes but I imagine you just want to place bolts. Quote
John Frieh Posted December 26, 2005 Author Posted December 26, 2005 I shot the shit with a dude at a hardwear store the other day... he recommended Tanaka. Anybody use them before? I looked up Pionjar and the only model I could find is the 120 (do they make more than one Mo?) which weighs in at 57 lbs... bolt on lead Bolts are one half my application purpose... my other interest would be continued route manufacturing on local bridge pilings. So... gas powered drill with similar weight to a Bulldog? Quote
MisterMo Posted December 26, 2005 Posted December 26, 2005 I looked up Pionjar and the only model I could find is the 120 (do they make more than one Mo?) which weighs in at 57 lbs... bolt on lead No, John, that's the one and only that I've ever seen; I was kinda messing with you. Just think how burly you'd be if you could put up something on lead with one of those mothers. Unbeatable tool in their place, but being down in a hole with rock dust and and engine exhaust sucks. Quote
John Frieh Posted December 26, 2005 Author Posted December 26, 2005 I looked up Pionjar and the only model I could find is the 120 (do they make more than one Mo?) which weighs in at 57 lbs... bolt on lead No, John, that's the one and only that I've ever seen; I was kinda messing with you. Just think how burly you'd be if you could put up something on lead with one of those mothers. Unbeatable tool in their place, but being down in a hole with rock dust and and engine exhaust sucks. If I got one of those the Sellwood Bridge will fall down! The Sellwood Bridge, on a scale of 100, rates a 2 for its structural health. The bridge, the only river crossing between Portland and Oregon City, sees 30,000 vehicles each day, many belonging to commuters from Clackamas County. Strapped for cash, Multnomah County has looked across the river for help, but so far, Clackamas County commissioners have been cool to the idea. Quote
billcoe Posted December 26, 2005 Posted December 26, 2005 Sgt Schultz on the gas rotohammer John. (I know notzing!) If you want a big industrial cheap free one, it's yours for the taking still hanging on the side of Cerro Torre. 'Bout 4500-5000 feet of cold assed frozen granite-rime iced cutting biting winds though. Might be a little tweaked after hangin there for the last 35 years, but it's evidently still there -garbage waiting to be hauled off. Good luck. Quote
John Frieh Posted December 26, 2005 Author Posted December 26, 2005 Admit it if you could drag that thing down you could sell it on ebay for enough to retire. Hmmm... Quote
Off_White Posted December 26, 2005 Posted December 26, 2005 So... gas powered drill with similar weight to a Bulldog? Nope, gas power is gonna weigh more. If you want to drill on the lead, go for battery power on a waist belt. If you're just gonna do the whack and dangle tango, anything goes. Scott's got a good point about the hot muffler issue, but running out of juice in the battery really sucks too. The battery is dead on my cordless, so at the end of the season on my crag in the front yard we resorted to dragging the generator over and running the corded hilti. The big bonus was it also ran the small compressor: 120 psi and a blow gun do a great job of not only cleaning out the holes but blowing the dust off all the holds too. Of course, you're not gonna pack that rig into whatever projects you've got up your sleeve. Quote
John Frieh Posted December 26, 2005 Author Posted December 26, 2005 A little more background: plan to use this drill for route manufacturing on concrete structures (drilling features) as well as adding bolts. As this would be done on concrete structures I get the feeling no one is going to whine if I place lead bolts (as well as make the climbing features) on rappel. My thoughts were I could drill a lot more holds/bolt holes with a gas drill and not have to constantly buy new batteries... hence my interest in petro power. If I were hiking any major distance I would opt for a hand drill or a Bosch. So... I'm thinking for my applications a few more pounds for a lot more holes and no dead batteries is fine with me. Looking at the Tanaka TED - 262HS for example the beast weighs in at 11.2 lbs dry. With a 17 ounce tank that mean 12.2ish lbs fully gassed. Compare that to a Bosch BULLDOG Xtreme 1" SDS-plus Rotary Hammer which weighs in at 6.7 lbs and I'd say the trade off is worth it. Am I on the right track here? Quote
larrythellama Posted December 27, 2005 Posted December 27, 2005 i wouldn't want to be caught drilling into any public structure. Quote
Weekend_Climberz Posted December 27, 2005 Posted December 27, 2005 i wouldn't want to be caught drilling into any public structure. This would be my first concern as well, but maybe John has already taken care of this by paying off the local government officials?? Quote
Dru Posted December 27, 2005 Posted December 27, 2005 Why bother with gas when there is a ready supply of hot air that can be used for power? Quote
John Frieh Posted December 28, 2005 Author Posted December 28, 2005 Why bother with gas when there is a ready supply of hot air that can be used for power? Coming from the guy with 29K posts Quote
DanielHarro Posted December 28, 2005 Posted December 28, 2005 What are you plans for a gas powerd drill?? Z-Face? Quote
DanielHarro Posted December 28, 2005 Posted December 28, 2005 didnt I see a bolt gun on the movie Cliffhanger??? That might work. Actually I have seen concrete anchor guns which use 22cal. rounds that puch holes. It might work. Quote
Dru Posted December 28, 2005 Posted December 28, 2005 Why bother with gas when there is a ready supply of hot air that can be used for power? Coming from the guy with 29K posts Why do you think I make so many posts, my battery needs lots of recharges! Quote
Dr_Flash_Amazing Posted December 28, 2005 Posted December 28, 2005 A little more background: plan to use this drill for route manufacturing [...] (drilling features) as well as adding bolts. Talk to Jerry Messinger; he has experience in both areas, as well as the gas drill (at least he used to). Quote
ketch Posted December 28, 2005 Posted December 28, 2005 Just curious John, there are little generators that are smaller than some briefcases. Easy to carry, quite efficient, allow you to use a much lighter smaller drill on the wall. If you are developing concrete I would assume it is not that hard to access. Are you really commited to a gas drill? Quote
John Frieh Posted December 28, 2005 Author Posted December 28, 2005 A little more background: plan to use this drill for route manufacturing [...] (drilling features) as well as adding bolts. Talk to Jerry Messinger; he has experience in both areas, as well as the gas drill (at least he used to). You got contact info Doc? Quote
RuMR Posted September 19, 2006 Posted September 19, 2006 I shot the shit with a dude at a hardwear store the other day... he recommended Tanaka. Anybody use them before? I looked up Pionjar and the only model I could find is the 120 (do they make more than one Mo?) which weighs in at 57 lbs... bolt on lead Bolts are one half my application purpose... my other interest would be continued route manufacturing on local bridge pilings. So... gas powered drill with similar weight to a Bulldog? do not be drilling into bridge pilings, you fucking moron... Quote
John Frieh Posted September 19, 2006 Author Posted September 19, 2006 Wait till I get an angle grinder Quote
RuMR Posted September 19, 2006 Posted September 19, 2006 john, that is seriously NOT cool to be drilling into bridge pilings...why the fuck would you do it? Just glue holds on and put up TR's or you gotta get hero-fix leading on concrete? Quote
John Frieh Posted September 19, 2006 Author Posted September 19, 2006 I only do it on the sellwood bridge Quote
kevbone Posted September 19, 2006 Posted September 19, 2006 Why do you think I make so many posts? I think that is obvious, you’re a tool with way to much time on your hands. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.