jesselillis Posted November 20, 2005 Share Posted November 20, 2005 i suppose i may get hammered for this one, but hopefully within the amusing comments, ill find a good answer. wire gates are stronger, lighter and not subject to gate flutter or freezing up, right? i guess lockers need them, but wheres the advantage to solid gate non-locking biners? and bent gate? easier to clip than straight gate maybe, but easier than wires? Quote Link to comment Share on other sites More sharing options...
tomtom Posted November 20, 2005 Share Posted November 20, 2005 Why do they eat at McDonalds? The food sucks and is bad for you. Maybe the coffee is ok, but that's it. Quote Link to comment Share on other sites More sharing options...
Peter_Puget Posted November 20, 2005 Share Posted November 20, 2005 Ever set up a carabiner rap system with wire gates? Quote Link to comment Share on other sites More sharing options...
crazyjizzy Posted November 20, 2005 Share Posted November 20, 2005 How many people today know what a biner rap system is, much less know how to set one up? Quote Link to comment Share on other sites More sharing options...
fenderfour Posted November 20, 2005 Share Posted November 20, 2005 Ever set up a carabiner rap system with wire gates? Â Yes. OP Dovals and BD Ovalwires work fine. Quote Link to comment Share on other sites More sharing options...
Peter_Puget Posted November 20, 2005 Share Posted November 20, 2005 Ever set up a carabiner rap system with wire gates? Â Yes. OP Dovals and BD Ovalwires work fine. Â All the biners used in the system were wire gate?? Quote Link to comment Share on other sites More sharing options...
John Frieh Posted November 20, 2005 Share Posted November 20, 2005 Ever set up a carabiner rap system with wire gates? Â Yes. OP Dovals and BD Ovalwires work fine. Â I bent an OP Doval gate during a carabiner rap system such that the gate was/is now outside the nose and tweaked to one side. I can post a pic later but I would say stay away from wiregates on rap. Quote Link to comment Share on other sites More sharing options...
whoohoonickieclimbs Posted November 20, 2005 Share Posted November 20, 2005 @least I am learning something! Quote Link to comment Share on other sites More sharing options...
catbirdseat Posted November 21, 2005 Share Posted November 21, 2005 How many people today know what a biner rap system is, much less know how to set one up? Well, everyone in the Mountaineers does. Quote Link to comment Share on other sites More sharing options...
dylan_taylor Posted November 21, 2005 Share Posted November 21, 2005 why wouldn't wiregate ovals work for a carabiner break? shouldn't the rope be over the spines anyway? Quote Link to comment Share on other sites More sharing options...
EWolfe Posted November 21, 2005 Share Posted November 21, 2005 i suppose i may get hammered for this one, but hopefully within the amusing comments, ill find a good answer. wire gates are stronger, lighter and not subject to gate flutter or freezing up, right? i guess lockers need them, but wheres the advantage to solid gate non-locking biners? and bent gate? easier to clip than straight gate maybe, but easier than wires? Â Here's why: After donning your laderhosen and kletterboots, then draping your goldline properly over your shoulder you need an appropriate set of 'biners for racking you hexentrics and corded stoppers. Â Hope that helps explain it. Quote Link to comment Share on other sites More sharing options...
Blake Posted November 21, 2005 Share Posted November 21, 2005 Ever set up a carabiner rap system with wire gates? Â I've done it with Neutrinos before. Quote Link to comment Share on other sites More sharing options...
Dru Posted November 21, 2005 Share Posted November 21, 2005 why do they make solid gate biners? Â because they can! Quote Link to comment Share on other sites More sharing options...
iain Posted November 21, 2005 Share Posted November 21, 2005 If you want keylock biners, there's only one wiregate that offers such a mechanism and at retail it is pretty expensive (last I checked). Just throwing that out there. Â Pretty sure your biners are not going to make or break your climbs. Unless they suck, of course. In which case you might die. Which is bad. Quote Link to comment Share on other sites More sharing options...
Dru Posted November 21, 2005 Share Posted November 21, 2005 Since they make Porsches, and Porsches are pretty damn good cars in general, why do they make Fords? Quote Link to comment Share on other sites More sharing options...
Cobra_Commander Posted November 21, 2005 Share Posted November 21, 2005 Do you see an f'ing american flag on a porsche? The porsche cayenne's windows do not accomodate multiple american flag + ala mater flag attachments during events such as the apple cup, or oregon/oregon state civil war. Typical that I have to spell it out for a canuck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.