Jump to content

Recommended Posts

  • Replies 166
  • Created
  • Last Reply

Top Posters In This Topic

Posted

I already know this coming Wed I will still be crushed at work. Thurs is a possibility, though.

 

Is the OSB backing in that pic so that to tools won't marr the otherwise pristine plywood?

Posted
  Alex said:
Is the OSB backing in that pic so that to tools won't marr the otherwise pristine plywood?

 

Yes... anything will work but OSB is cheap.

 

Just a heads up but adding the backing to holds will likely require you get some longer T nuts for some of your holds... might want to grab a box @ the hard wear store when you pick up the OSB unless you already have a bunch of longer length

Posted
  John Frieh said:
climbing_wall_002.jpg

climbing_wall_004.jpg

john, are you wearing a kevlar vest in case some insurgent decides to pop a cap in yer ass while getting yer pump on? :P

  • 4 weeks later...
Posted

Stone Gardens is proud to open our dry-tooling wall to the public! The routes are on our outdoor wall. Right now we have M5-M7 and will get easier and harder routes up soon. Come lead or top-rope (must have passed our belay and/or lead/lead belay tests), rain or shine, night or day (bring a headlamp for night climbing!). Call the gym for more information at 206.781.9828.

 

RULES:

• Check in with front desk staff before climbing

• Top rope belayers, lead climbers and belayers must have passed appropriate Stone Gardens Test

 

• Climbers and belayers must wear helmets

• Eye and face protection is strongly encouraged

• Belayers must stand out of tool drop zone

• Spectators must stand well away from wall

• Be careful with tool placements, save the wall!

 

• If wall becomes damaged from tools or boots we may have to put an end to dry tooling here

 

• NO CRAMPONS ALLOWED

• NO MOUNTAIN BOOTS ALLOWED

• Please wear rock shoes or light approach shoes

• Tool only on holds, do not tool into t-nut holes or plywood base plates

• Do not hook arêtes

• Refrain from dynamic placements

• Report any rope damage or other incidents

• Have fun!

 

  • 2 weeks later...
Posted

Jared_j and i hit Stone gardens and they get a :tup: Both for setting up the ropes initially even though they were busy (sorry for the snide comment, I was a little disgruntled with the prospect of not getting any drytooling in :wave: ).

Ran into Dylan and Andre, thanks for stringing the line on the M7 Dylan :tup: I scratched my way a few moves past the transition before burning out. Good quality routes. Definitely pumpy than what I've done outside so far, but a good evenings worth of climbing.

And mad props to the guy who let the M5 onsight for his first time ever using ice tools :tup: Serious cajones!

  • 4 weeks later...
Posted

Anybody interested? Weather permitting of course. I'm thinking a 1/2 day either Sat or Sun. morning. E38, Issaquah, or even Stone Gardens, though I'd like to get on crampons as well as tools :wave:

p.s. First timers welcome, you just need to be able to belay. I've got spare crampons and tools.

Posted

Weekend Climber and I got out over the weekend and scratched the rock up a little more. The four anchors and the lead bolts are in good shape.

Mostly top roping but I finally jumped on the right hand route to give it a go on lead. Nice job on the bolt spacing Alex :tup: They were right where I wanted them :)

  • 1 month later...
Posted

To be fair, I didn't really do any "developing" of the SR900 crag other than to replace some of the rusty 1/4 bolts that were already there, and add a few along the natural lines of ascent for leading. The crag itself has been loooong established; Dan Smith and I climbed there sometime in the mid-90s a few times, and other local climbers have rock climbed and dry-tooled there over the decades. In the summer time/when dry, the rock lines go at around 5.6 or 5.7. The rock itself is sandstone and is pretty junky and a bit vegetated, due to lack of traffic. Its the right combo fer drytooling practice through, certainly better than the downsloping slopers at ex38.




×
×
  • Create New...