Blake Posted October 20, 2005 Share Posted October 20, 2005 I climb on a blue and purple (1, 0) Metolius TCUs that are pretty old, and I've reslung them. They are from before the lobes were formed with little teeth, and when all three trigger wires met in the middle of the trigger. Since they have been re-slung, is anything wrong with trusting them? I haven't fallen on one yet. Quote Link to comment Share on other sites More sharing options...
forrest_m Posted October 20, 2005 Share Posted October 20, 2005 <standard internet response> oh my god, it's just a ticking timebomb! you should send them to me so that they can be disposed of properly! </standard internet response> no, seriously, i'm sure they're fine. the little ones don't have teeth anyway (a rep once told me that the teeth don't really do anything, people just buy more when they added them). the newer ones might have better action or be have wider range or some other improvements, but unless you've been storing them in a pool of acid or a salt-water fishtank, it's hard to imagine why a metal gadget would "go bad" with age... sewn goods are another story, but since you've re-slung them, i'd say direct your worry elsewhere. Quote Link to comment Share on other sites More sharing options...
RuMR Posted October 20, 2005 Share Posted October 20, 2005 they are fine...i still use mine (and fall on them) all of the time...in some ways, i almost prefer the smooth lobes... Quote Link to comment Share on other sites More sharing options...
tomtom Posted October 20, 2005 Share Posted October 20, 2005 When in doubt: 1) Place cam in crack 2) Place sling on cam 3) Place foot in sling 4) JUMP UP AND DOWN VIGOROUSLY. 5) Replace cam on rack. Any questions? Quote Link to comment Share on other sites More sharing options...
EWolfe Posted October 20, 2005 Share Posted October 20, 2005 I climb on a blue and purple (1, 0) Metolius TCUs that are pretty old, and I've reslung them. They are from before the lobes were formed with little teeth, and when all three trigger wires met in the middle of the trigger. Since they have been re-slung, is anything wrong with trusting them? I haven't fallen on one yet. No! No! Obsolete and dangerous! You better give them to me so you aren't tempted! Quote Link to comment Share on other sites More sharing options...
Cobra_Commander Posted October 20, 2005 Share Posted October 20, 2005 When in doubt: 1) Place cam in crack 2) Place sling on cam 3) Place foot in sling 4) JUMP UP AND DOWN VIGOROUSLY. 5) Replace cam on rack. Any questions? Be sure to put something over the cam unless you like getting your nuts/forehead/face taken out. Quote Link to comment Share on other sites More sharing options...
Blake Posted October 20, 2005 Author Share Posted October 20, 2005 any clue on how many years old I should let a cam be before replace the original nylon sling? Quote Link to comment Share on other sites More sharing options...
tomtom Posted October 20, 2005 Share Posted October 20, 2005 When in doubt: 1) Place cam in crack 2) Place sling on cam 3) Place foot in sling 4) JUMP UP AND DOWN VIGOROUSLY. 5) Replace cam on rack. Any questions? Be sure to put something over the cam unless you like getting your nuts/forehead/face taken out. Something like this? Quote Link to comment Share on other sites More sharing options...
John Frieh Posted October 21, 2005 Share Posted October 21, 2005 any clue on how many years old I should let a cam be before replace the original nylon sling? I read spectra slings have a recommended usage of 100 days of climbing (UV exposure)... not sure if that is just someone from the industry trying to get you to buy more crap or what... maybe someone has an article? As most cam slings are nylon I'd think once it's faded or it gets any nicks or cuts (stupid crampons!) you should do it. BD and many other companies do it quick and hella cheap! Quote Link to comment Share on other sites More sharing options...
Blake Posted October 21, 2005 Author Share Posted October 21, 2005 any clue on how many years old I should let a cam be before replace the original nylon sling? I read spectra slings have a recommended usage of 100 days of climbing (UV exposure)... not sure if that is just someone from the industry trying to get you to buy more crap or what... maybe someone has an article? As most cam slings are nylon I'd think once it's faded or it gets any nicks or cuts (stupid crampons!) you should do it. BD and many other companies do it quick and hella cheap! thanks john, i have a few old friends and TCUs (nylon) I'm wondering about. Quote Link to comment Share on other sites More sharing options...
kurthicks Posted October 21, 2005 Share Posted October 21, 2005 I read spectra slings have a recommended usage of 100 days of climbing (UV exposure)... not sure if that is just someone from the industry trying to get you to buy more crap or what... maybe someone has an article? i've been looking for an article too. at this point I think it the manufacturers are doing a lot of CYA, like they do with ropes. Quote Link to comment Share on other sites More sharing options...
cj001f Posted October 21, 2005 Share Posted October 21, 2005 I read spectra slings have a recommended usage of 100 days of climbing (UV exposure) tangentially spectra sails have better UV resistance than Nylon sails; slings are similar enough. Quote Link to comment Share on other sites More sharing options...
catbirdseat Posted October 21, 2005 Share Posted October 21, 2005 I read spectra slings have a recommended usage of 100 days of climbing (UV exposure) tangentially spectra sails have better UV resistance than Nylon sails; slings are similar enough. I think that spectra isn't inherently UV resistant. Spectra sailcloth is treated with a special UV resistant finish. The only fiber I know of that has excellent UV resistance is acrilan (acrylic). Quote Link to comment Share on other sites More sharing options...
John Frieh Posted October 21, 2005 Share Posted October 21, 2005 When in doubt replace them. BD does it cheap (i.e. free generally) if it is a camalot but you didn't hear that from me. Quote Link to comment Share on other sites More sharing options...
sobo Posted October 22, 2005 Share Posted October 22, 2005 Will BD sew slings onto cams that are not of their manufacture? I have a bunch of Metolius and ABC cams that are slung with tied slings right now, and I'd like to clean that mess up a bit. Quote Link to comment Share on other sites More sharing options...
korup Posted October 26, 2005 Share Posted October 26, 2005 Yates gear reslings any cams for way cheap, $4-5, very fast. I sent 4, spent more on shipping and insurence than the total cost. You can pick colors, nylon, spectra, etc. Just resling 'em all; I had several that were sketching me out, and now they are brand-spankin' new... http://www.yatesgear.com/climbing/slings/index.htm#9 Quote Link to comment Share on other sites More sharing options...
korup Posted October 26, 2005 Share Posted October 26, 2005 Yates gear reslings any cams for way cheap, $4-5, very fast. I sent 4, spent more on shipping and insurance than the total cost. You can pick colors, nylon, spectra, etc. Just resling 'em all; I had several that were sketching me out, and now they are brand-spankin' new... http://www.yatesgear.com/climbing/slings/index.htm#9 Quote Link to comment Share on other sites More sharing options...
sobo Posted October 26, 2005 Share Posted October 26, 2005 Thanks, korup! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.