allison Posted May 28, 2003 Share Posted May 28, 2003 I just started learning to slackline last weekend. It is soo much fun. Now I want to put together a system of my own. I'm looking for a device that is cheap and easy to use (not a GriGri) that will grab the tensioning rope when the people tightening let go of it. It's okay with me if the grabbing device needs a couple of half hitches to keep it grabbing. Someone last night said a Tibloc would be the best thing. You agree? The system will always only be set up temporarily as I don't have a good place for it at home. Also looking for 2 rescue pulleys and a piece of static line in the 30' range to complete the kit, if anyone's got something they want to donate or sell cheep. The system will prob never be set up more than 3 or 4 feet off the ground, so old gear you maybe wouldn't climb on will be fine. Finally a good use for some of my own old or questionable gear! Quote Link to comment Share on other sites More sharing options...
sobo Posted May 28, 2003 Share Posted May 28, 2003 Prussiks? Altho tiblocs are pretty cute lil' thangz. When you say "rescue pulleys" are you referring to simple pulleys or are you referring to prussik-minding pulleys? Conterra is a good source for rescue-type equipment of the nature of PMPs. A short length of static line could be picked up at Home Depot or Lowe's, and it'll be OK for this situation since it's only going to be a coupla feet off the ground, and not in some highline rescue sitmo. Quote Link to comment Share on other sites More sharing options...
snoboy Posted May 28, 2003 Share Posted May 28, 2003 Prusik, and/or a garta hitch on a releasable chumk of cord. Quote Link to comment Share on other sites More sharing options...
erik Posted May 28, 2003 Share Posted May 28, 2003 AND YOU DONT NEED PULLYS, I MEAN OVAL BINERS HAVE ATLEAST ONE GOOD APPLICATION. ALSO THE GRI GRI IS THE BEST THING TO USE. WITH IT, SETUP ONLY TAKES LIKE 5 MINUTES AT THE MOST AND YOU CAN PULL IT TIGHT BY YOURSELF. I QUIT SLACKLINING CAUSE IT IS HARD ON YOUR KNEES AND ANKLES. DONT YOU HAVE BAD ANKLES? Quote Link to comment Share on other sites More sharing options...
texplorer Posted May 28, 2003 Share Posted May 28, 2003 Slacklining is very hard on the ankles especially if you bust the slackline like I did and the biners nail you in the foot. Quote Link to comment Share on other sites More sharing options...
allison Posted May 28, 2003 Author Share Posted May 28, 2003 Yes, I'm talking about plain little pulleys. Sorry, at my work we call the kind used in climbing applications "rescue pulleys" to distingush them from the myriad other kinds of pulleys and things we use. I prefer pulleys to the biner method because there is so much less drag. I know a prusik would work but a Tibloc or similar is a bit more elegant. And yes Erik, I do have horrible ankles. To wit, I don't plan on making it a daily activity, and the landing's got to be mighty soft. The actual activity of slacklining looks to be super good conditioning for the fu'ed up anklets too. Quote Link to comment Share on other sites More sharing options...
Fence_Sitter Posted May 28, 2003 Share Posted May 28, 2003 if by conditioning you mean snapping! Quote Link to comment Share on other sites More sharing options...
erik Posted May 28, 2003 Share Posted May 28, 2003 yeah ankle break is prolly the most common slackline injury to boot. Quote Link to comment Share on other sites More sharing options...
Szyjakowski Posted May 28, 2003 Share Posted May 28, 2003 why did you quit ERIK, get ejected to many times.... Quote Link to comment Share on other sites More sharing options...
erik Posted May 28, 2003 Share Posted May 28, 2003 scuzzy apprently you are still stoned. it hurts my knee, you should attempt to read above! Quote Link to comment Share on other sites More sharing options...
Szyjakowski Posted May 28, 2003 Share Posted May 28, 2003 right... already read that... it hurts you cause you got ejected too many times... Quote Link to comment Share on other sites More sharing options...
erik Posted May 28, 2003 Share Posted May 28, 2003 no shit i fall with everything i do i can also walk it back and forth and turn whats your point? Quote Link to comment Share on other sites More sharing options...
Bronco Posted May 28, 2003 Share Posted May 28, 2003 isn't webbing preffered for slack lines? I used a hunk of static rope for a while and now use some 1" webbing. It's a lot easier to start on. Quote Link to comment Share on other sites More sharing options...
allison Posted May 28, 2003 Author Share Posted May 28, 2003 So slackline ankle breakage can commonly occur when the slackline is just above the ground and the landing is soft? Ours this last weekend was rigged about 3' off the ground, and as tight as we could get it (with the tensioning line being unfortunately a dynamic--not recommended) so at the middle you were like 6 inches off the ground. I guess with the ferocity that the slackline can spit ya, anything's possible....hmmmm....more input please! Quote Link to comment Share on other sites More sharing options...
fern Posted May 28, 2003 Share Posted May 28, 2003 tiblocs shred ropes, even if you use a tibloc you should use a prussik or similar to back it up, so why not just use the prussik in the first place? and so what if pulleys reduce drag, it's a static system once you get it set up, it's not like a crevasse rescue or hauling or anything where the moving parts are the whole point of the exercise. people who have set these up give you advice on a simple low tech system and you discount it for one that requires more expensive fancy equipment. funny Quote Link to comment Share on other sites More sharing options...
JoshK Posted May 28, 2003 Share Posted May 28, 2003 so what the hell is the point of this slackline thingy? You just tie a rope between two points and walk across it? Quote Link to comment Share on other sites More sharing options...
Bronco Posted May 28, 2003 Share Posted May 28, 2003 yep Quote Link to comment Share on other sites More sharing options...
iain Posted May 28, 2003 Share Posted May 28, 2003 quick access to the mouth of monkeyface. Quote Link to comment Share on other sites More sharing options...
allison Posted May 28, 2003 Author Share Posted May 28, 2003 Bronco said: isn't webbing preffered for slack lines? I used a hunk of static rope for a while and now use some 1" webbing. It's a lot easier to start on. Nononono the slackline itself is webbing, but the tensioning line is a static rope. There are lots of ways to rig a slackline, from my very limited experience. And Fern thanks for your comments. Maybe it was just because we were tensioning the system with a dynamic rope last weekend, but the added drag of biners would have made it hella difficult to get the slackline tight enough if we'd been fighting the friction of the biners as well. Quote Link to comment Share on other sites More sharing options...
ExtremoMtDude Posted May 28, 2003 Share Posted May 28, 2003 Slacklining is the Jibbing of the Climbing world. The webbing is just like a rail, but you are basically jibbin around. So therefore: Slacklining = Jibbing Erik = Slackliner Erik = Jibber ! LOL!@!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
chucK Posted May 28, 2003 Share Posted May 28, 2003 Isn't a slackline supposed to be slack? Quote Link to comment Share on other sites More sharing options...
iain Posted May 28, 2003 Share Posted May 28, 2003 Isn't it supposed to be a line? Quote Link to comment Share on other sites More sharing options...
sobo Posted May 28, 2003 Share Posted May 28, 2003 allison said: blah blah blah....hmmmm....more input please! go here Quote Link to comment Share on other sites More sharing options...
erik Posted May 28, 2003 Share Posted May 28, 2003 ExtremoMtDude said: Slacklining is the Jibbing of the Climbing world. The webbing is just like a rail, but you are basically jibbin around. So therefore: Slacklining = Jibbing Erik = Slackliner Erik = Jibber ! LOL!@!!!!!!!!! but like jibbing half piping it, i hace done it. but that doesnt mean i still do. Quote Link to comment Share on other sites More sharing options...
iain Posted May 28, 2003 Share Posted May 28, 2003 whatever, jibber. once a jibber always a jibber. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.