builder206 Posted September 23, 2007 Share Posted September 23, 2007 Do you leash your belay device to your pearbiner? Or, why would you not do so? Quote Link to comment Share on other sites More sharing options...
Bug Posted September 24, 2007 Share Posted September 24, 2007 I always have. Well, not always. hat time it ended up too far away for mr to reach it. It was a bummer. Now I use a reverso and clip it into my parabiner. Quote Link to comment Share on other sites More sharing options...
builder206 Posted September 24, 2007 Author Share Posted September 24, 2007 I just rigged one from small cord (3 or 4 mm, I dunno) and used it for the 1st time Saturday. It was a bit of a bother. Before that, every time I took the device off my pearbiner I held my breath and was verry careful to hold on to it, but it looks like all I did was trade one kind of grief for another. The length is right but that's the only good thing I can say at this point. Rope evolutions slowed as I worked with the leash in addition to rope, device, pearbiner. Quote Link to comment Share on other sites More sharing options...
Rad Posted September 24, 2007 Share Posted September 24, 2007 I use one but tie it to a biner on the side or back of my harness (same one w/cleaning tool). That way I can clip it out of the way when not in use and don't have to worry about dropping it. Quote Link to comment Share on other sites More sharing options...
high_on_rock Posted September 24, 2007 Share Posted September 24, 2007 I didn't think anyone still leashed belay devices since the figure-8 went out of style. Just don't drop it, if you do use a munter hitch. Quote Link to comment Share on other sites More sharing options...
builder206 Posted September 24, 2007 Author Share Posted September 24, 2007 (edited) I didn't think anyone still leashed belay devices since the figure-8 went out of style. Just don't drop it, if you do use a munter hitch. Â Yeh, I know what to do if I drop the device which is why I don't want to drop the device. But...what's the reference to "figure 8 going out of style?" What are you talking about there? A fig 8 device?---I'm talking about leashing my belay device to my pearbiner. Edited September 24, 2007 by builder206 Quote Link to comment Share on other sites More sharing options...
marylou Posted September 24, 2007 Share Posted September 24, 2007 I don't want no little piece of string fouling the device. Bad idea. Â Learn to do a Munter, you oughtta know that one anyway. Quote Link to comment Share on other sites More sharing options...
rob Posted September 24, 2007 Share Posted September 24, 2007 I don't use a leash. I never remove my device from my HMS biner. My biner is big enough that I can just move the device to the side and clip the rope without actually removing it. I've never really worried about it. Seems a leash would get in the way, but I see lots of people doing it so it must not be too bad. Quote Link to comment Share on other sites More sharing options...
catbirdseat Posted September 24, 2007 Share Posted September 24, 2007 I used a leash for a short time when I was new to climbing. It was always getting in the way and seemed like a bother. I dispensed with it, and in 9 years of climbing have yet to lose a belay device. The trick is to never take the device off your HMS biner as Rob mentioned. Quote Link to comment Share on other sites More sharing options...
Bug Posted September 24, 2007 Share Posted September 24, 2007 Yes. I was thinking of the cord I used to have on my stitch plate that just keeps the plate close so you can always reach it. I have not ever used a Leash for clipping and unclipping. It seems like it would be in the way all the time. Quote Link to comment Share on other sites More sharing options...
G-spotter Posted September 24, 2007 Share Posted September 24, 2007 Leashes are aid. Quote Link to comment Share on other sites More sharing options...
builder206 Posted September 24, 2007 Author Share Posted September 24, 2007 My biner is big enough  Yeah, my biner is big enough too, Rob! Don't be starting that kind of shit with me, man! Quote Link to comment Share on other sites More sharing options...
Bug Posted September 24, 2007 Share Posted September 24, 2007 But...what's the reference to "figure 8 going out of style?" What are you talking about there? A fig 8 device?---I'm talking about leashing my belay device to my pearbiner. Â Fig 8's were used as belay devices for a short time. At least, it should have been a short time. We stuck the belay loop (bite) through the small hole and clipped to the rope just like a stitch plate, sort of. Quote Link to comment Share on other sites More sharing options...
G-spotter Posted September 24, 2007 Share Posted September 24, 2007 Don't forget the Eurostyle sport belay (pre Grigri) with one strand thru in descender mode and one hand holding an unfiltered Gauloise Quote Link to comment Share on other sites More sharing options...
spotly Posted September 24, 2007 Share Posted September 24, 2007 No leash. Sounds like a pain. Quote Link to comment Share on other sites More sharing options...
archenemy Posted September 24, 2007 Share Posted September 24, 2007 I don't use a leash. I never remove my device from my HMS biner. My biner is big enough that I can just move the device to the side and clip the rope without actually removing it. Same here. Quote Link to comment Share on other sites More sharing options...
builder206 Posted September 24, 2007 Author Share Posted September 24, 2007 OK, got it, lose the leash. Â When I started climbing we used a hip belay. Why, we even made our own ropes before every climb! Out of hemp...uphill in the snow both ways. It's gotten so easy now. Quote Link to comment Share on other sites More sharing options...
high_on_rock Posted September 25, 2007 Share Posted September 25, 2007 Never lose the hip belay, it is quick, easy, and perfect for a lot of situations. Just because there is a newer way, don't lose the Old's Cool style! Quote Link to comment Share on other sites More sharing options...
rob Posted September 25, 2007 Share Posted September 25, 2007 When I started climbing we used a hip belay. Why, we even made our own ropes before every climb! Out of hemp...uphill in the snow both ways. It's gotten so easy now. Â When you started climbing, had the mountains even formed yet? Quote Link to comment Share on other sites More sharing options...
G-spotter Posted September 25, 2007 Share Posted September 25, 2007 When I started climbing, the Earth hadn't even formed yet. We had to accrete our own planetesimals. Quote Link to comment Share on other sites More sharing options...
JosephH Posted September 25, 2007 Share Posted September 25, 2007 All three Reversos I've used over time are drilled and leashed. I also still hip belay a lot. Damn, still uncool after all these years... Quote Link to comment Share on other sites More sharing options...
Bug Posted September 25, 2007 Share Posted September 25, 2007 I hand over hand like the French. Why get all tangled up? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.