wfinley Posted January 23, 2006 Posted January 23, 2006 I wasn't paying attention this past weekend and drove my (BD Stinger) pick into thin ice and managed to bend the pick on the rock underneath. The pick wasn't bent too badly -- and I was able to bend it back straight by stuffing it in a crack and twisting the tool. My question is... how much did I weaken the pick when I did this? Should I go ahead and replace the pick now... or hold off and see if it gives me trouble (and carry a spare one with me)? Quote
Dru Posted January 23, 2006 Posted January 23, 2006 Bends break. Replace it now or break it halfway up a route sooner or later. Quote
genepires Posted January 24, 2006 Posted January 24, 2006 replace. surpised it didn't break when you bent it back. Quote
wfinley Posted January 24, 2006 Author Posted January 24, 2006 Thanks all. It wasn't a very bad bend (btm 2 cm bent sideways maybe 3/4 cm) but I think I'll play it safe anyways. Quote
John Frieh Posted January 24, 2006 Posted January 24, 2006 If it was a Petzl pick it would be fine... they again it wouldn't have bent in the first place Quote
kurthicks Posted January 24, 2006 Posted January 24, 2006 If it was a Petzl pick it would be fine... they again it wouldn't have bent in the first place  or Grivel. Quote
John Frieh Posted January 24, 2006 Posted January 24, 2006 If it was grivel you would have to throw away the whole tool as the pick is likely bolted to the head Quote
kurthicks Posted January 24, 2006 Posted January 24, 2006 not on the newest version that I saw (maybe the x-monsters). it's bolted on...now they have to just sell replacement picks. go consumerism! Quote
fenderfour Posted January 24, 2006 Posted January 24, 2006 They were always bolted on. The end of the bolts are peened over. Quote
Nick Posted January 26, 2006 Posted January 26, 2006 The threads of a peened-over bolt can be repaired with judicious use of a triangular file. The bolt should back out easily if threads are re-cut neatly. If this can't be managed you can trim off the peened end of the bolt with a hack saw (or angle grinder) and back the bolt out. Messed up bolts should be replaced with new ones. Quote
John Frieh Posted January 26, 2006 Posted January 26, 2006 That's great and all but once you get it off what are you going to replace it with? Grivel currently doesn't sell replacement picks to the monster and monsterX Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.