sketchfest Posted January 4, 2006 Share Posted January 4, 2006 I recently poked a very small hole in the back leg of my scholler climbing pants with my crampon. Is there anyway to patch this hole to keep it fom getting any bigger and ruining the pants? Quote Link to comment Share on other sites More sharing options...
snoboy Posted January 5, 2006 Share Posted January 5, 2006 If it's really small then nail polish should keep it from fraying. Quote Link to comment Share on other sites More sharing options...
OlegV Posted January 5, 2006 Share Posted January 5, 2006 superglue it! Quote Link to comment Share on other sites More sharing options...
John Frieh Posted January 5, 2006 Share Posted January 5, 2006 I've been taking all my cut stuff to mountain soles... they take forever to sew things (2 weeks!) but I just have them zig zag it shut and then I coat the threads with seam sealer. It looks tacky but it works. Â They offered to sew patches over two particularly large holes... I took them up on it (as it was only 10 bucks for 2 patches)... crappy job! The patches were a joke so I just cut them off. Â Speaking of does anyone know of anyone else in/around PDX that does repair/alterations? Quote Link to comment Share on other sites More sharing options...
JackY Posted January 5, 2006 Share Posted January 5, 2006 Â If it's a small puncture or tare place a piece of tape on the outside and seam seal the inside, remove the tape when dry and voila! Quote Link to comment Share on other sites More sharing options...
Dru Posted January 5, 2006 Share Posted January 5, 2006 I recently poked a very small hole in the back leg of my scholler climbing pants with my crampon. Is there anyway to patch this hole to keep it fom getting any bigger and ruining the pants? Â Holes in schoeller don't get bigger. I popped a little rip in the knee of my Scoeller pants 6 years ago and it's still the same size. Quote Link to comment Share on other sites More sharing options...
rat Posted January 6, 2006 Share Posted January 6, 2006 If it's a small puncture or tare place a piece of tape on the outside and seam seal the inside, remove the tape when dry and voila! Â use aqua-seal. Quote Link to comment Share on other sites More sharing options...
Davis Posted January 17, 2006 Share Posted January 17, 2006 I take two pieces of wax paper and two pieces of hard flat board and I apply seam seal to the hole and then sandwich it with the wax paper and then the wood and clamp it over night. The repairs that I have done this way have lasted years and years, and they are perfectly flat. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.