salbrecher Posted October 1, 2004 Share Posted October 1, 2004 Whats the best way to clean dirty rigid friends. They spring back really slowly. Quote Link to comment Share on other sites More sharing options...
Alpinfox Posted October 1, 2004 Share Posted October 1, 2004 Boil some water, add a little dishsoap, stick the cam in there and work the trigger back and forth. You can scrub with an old toothbrush at this point. Might help. Rinse well. Lubricate with WD40 or silicone spray. That's what I do. It seems to work pretty well. Quote Link to comment Share on other sites More sharing options...
Dru Posted October 1, 2004 Share Posted October 1, 2004 DONT USE WD40!!!!!! Or silicon. it attracts dirt. The problem will come back worse. Use a Wax Based lube like White Lightning, or Metolius Cam Lube. Or, use a Graphite-based lubricant like for sewing machines. Quote Link to comment Share on other sites More sharing options...
telemarker Posted October 1, 2004 Share Posted October 1, 2004 White gas, just don't let the gas touch the runner. Quote Link to comment Share on other sites More sharing options...
RuMR Posted October 1, 2004 Share Posted October 1, 2004 dru or scuzzy or catbirdseat can confirm this, i think, but gas doesn't affect nylon... probably still a good idea to keep it off of the runners though... I use plain gas, and then lube with pedro's... Quote Link to comment Share on other sites More sharing options...
Dru Posted October 1, 2004 Share Posted October 1, 2004 I boil and then White Lightning. Quote Link to comment Share on other sites More sharing options...
John Frieh Posted October 1, 2004 Share Posted October 1, 2004 cam lube/cleaning discussion Quote Link to comment Share on other sites More sharing options...
Stretch75 Posted October 1, 2004 Share Posted October 1, 2004 By the way, I ended up boiling water and setting the cams in for a bit, then used compressed air to dry, and get the hard to reach areas. Went out and bought the Metolius kit. Worked like a charm . Thanks for all the input!! --Stretch Quote Link to comment Share on other sites More sharing options...
catbirdseat Posted October 4, 2004 Share Posted October 4, 2004 dru or scuzzy or catbirdseat can confirm this, i think, but gas doesn't affect nylon... probably still a good idea to keep it off of the runners though... I use plain gas, and then lube with pedro's... Yes, gas would work, but why take a risk with something so volatile and flammable when something safe like detergent and water will work just as well, if not better? Gasoline is good at dissolving the old oil, but not as good at suspending dirt and grit as water. Dru is right about the lube. Get wax-based. These are the same as bicyclists use on their chains. The wax is dissolved in solvent base which evaporates. The wax left behind lubricates, but being a solid, the dirt doesn't stick to it. You should still wipe off any excess before it dries. Quote Link to comment Share on other sites More sharing options...
Alpinfox Posted October 5, 2004 Share Posted October 5, 2004 OK. So if soaking cams in boiling water works, and if soaking them in white gas works, how about soaking them in boiling white gas? That ougta work REEEEL GOOD eh? Anyway, what specific brands of wax-based or graphite-based lubes have people used for cams besides the specially packaged (i.e. really expensive) stuff like Metolius cam lube? Where did you get it? Is the wax-based better than the graphite? Quote Link to comment Share on other sites More sharing options...
sobo Posted October 5, 2004 Share Posted October 5, 2004 Anyway, what specific brands of wax-based or graphite-based lubes have people used for cams besides the specially packaged (i.e. really expensive) stuff like Metolius cam lube? Where did you get it? Is the wax-based better than the graphite? I get a paraffin wax product with a citrus juice carrier at the local bicycle shop. Smells like orange juice with a candle in it. Can't remember the name of it, tho... I think it's probably the same stuff to which Dru was referring. Quote Link to comment Share on other sites More sharing options...
Kevin_Matlock Posted October 5, 2004 Share Posted October 5, 2004 I get a paraffin wax product with a citrus juice carrier at the local bicycle shop. Smells like orange juice with a candle in it. Can't remember the name of it, tho... Uh, Newman's Own salad dressing I think... Quote Link to comment Share on other sites More sharing options...
sobo Posted October 5, 2004 Share Posted October 5, 2004 Oh, wait! That was pot pourri! Doh! Quote Link to comment Share on other sites More sharing options...
sobo Posted October 7, 2004 Share Posted October 7, 2004 Pax, The product to which I was referring above is called KryTech, which is sold under the brand name of Finish Line, and the main ingredient (krytox) is manufactured by DuPont. It is a paraffin wax lubricant in a solvent (not citrus - sorry, my ooops) carrier. It runs about $5 for a 2 oz. squirt bottle at most bike shops. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.