olyclimber Posted January 10, 2005 Share Posted January 10, 2005 ARRRRRRRGGGGGGG!!!!!! Quote Link to comment Share on other sites More sharing options...
Double_E Posted January 10, 2005 Share Posted January 10, 2005 sure is, knotter! Quote Link to comment Share on other sites More sharing options...
jjd Posted January 10, 2005 Share Posted January 10, 2005 this is my favorite useless knot: Quote Link to comment Share on other sites More sharing options...
chelle Posted January 10, 2005 Share Posted January 10, 2005 its a great knot for shortening your tent guy lines in boy scout summer camp, I think I got extra credit for throwing it in the mix. But I got the most points for tying up a whole Girl Scout Troop with bowlines. Hey Ducknut...there's a way to modify a clovehitch to create handcuffs that allow you to tie up unruly girlscouts or climbing partners. Quote Link to comment Share on other sites More sharing options...
Thinker Posted January 10, 2005 Share Posted January 10, 2005 its a great knot for shortening your tent guy lines in boy scout summer camp, I think I got extra credit for throwing it in the mix. But I got the most points for tying up a whole Girl Scout Troop with bowlines. Hey Ducknut...there's a way to modify a clovehitch to create handcuffs that allow you to tie up unruly girlscouts or climbing partners. Photos, please, Chelle! Quote Link to comment Share on other sites More sharing options...
Blake Posted January 10, 2005 Share Posted January 10, 2005 I thought it was called a "not knot"? The climbing application I have heard of for sheep shank was in one of those ... "you only have one rope to rappel but all your anchors are more than 1/2 rope length apart WHAT DO YOU DO???" threads. The idea was to cut the middle thread of the sheep shank, rap down and shake the rope free. rope gets a little shorter with each rap but otherwise BOMBER! This actually sounds like it might be usefull, but from just tying a sheepshank with a bit of 7mm cord, I can't really figure out what you'd do. Can anyone give a more detailed description? Quote Link to comment Share on other sites More sharing options...
bunglehead Posted January 10, 2005 Author Share Posted January 10, 2005 Well...take some disposable cord, make a sheepshank, look at the 3 internal strands and you can see that one of them is not holding weight from either end. Or if you can't figure it out by looking, tie a 'shank to a tree, hold the other end in your hand, and start cutting strands one at a time to see what happens. It's one of those "Oooohhhhh...I see!" kind of deals. Quote Link to comment Share on other sites More sharing options...
Ducknut Posted January 11, 2005 Share Posted January 11, 2005 its a great knot for shortening your tent guy lines in boy scout summer camp, I think I got extra credit for throwing it in the mix. But I got the most points for tying up a whole Girl Scout Troop with bowlines. Wanna demonstrate? Hey Ducknut...there's a way to modify a clovehitch to create handcuffs that allow you to tie up unruly girlscouts or climbing partners. Quote Link to comment Share on other sites More sharing options...
EWolfe Posted January 11, 2005 Share Posted January 11, 2005 Granny. Quote Link to comment Share on other sites More sharing options...
chelle Posted January 11, 2005 Share Posted January 11, 2005 Ducknut - I can only give you some simple instructions... 1) Make the two loops you'd make for a clove hitch. 2) Overlap them and then pull 1/2 of each (inside 1/2) through the outside edges to make two "ear" loops. 3) Place over hands or feet of your captive and pull the tails of the rope tight. From there you are on your own. And I don't wanna hear about it. Mr.E - you commenting on my age? You're still older than me... Quote Link to comment Share on other sites More sharing options...
nalo Posted January 11, 2005 Share Posted January 11, 2005 the thing with the fixed rope and the shaking and the sheepshank.... i don't get it... what do you tie around where to get it to work... thanks Quote Link to comment Share on other sites More sharing options...
tshimko Posted January 11, 2005 Share Posted January 11, 2005 Its a way to use almost the full length of a rope on a single rope rapppel and retrieve almost all of the rope. The top end of the rope is tied to the anchor, then comes the sheepshank. You rappel from below the knot, but before you go, while the knot is loaded, you cut the middle strand of the knot, the one that is not loaded (be sure you get the right one). The knot stays together so long as it is loaded, but once you get off rappel, a shake of the rope loosens the assembly, getting all the rope down except for the little you used in the sheepshank knot plus the knot for the anchor. I'm told that sailors used to use it to descend from masts in the old days. Quote Link to comment Share on other sites More sharing options...
ketch Posted January 11, 2005 Share Posted January 11, 2005 Acrobat acts used to do this thing where they tied a knot on the end of a piece of pipe. Then by leaning back and using the rope they could climb/balance up the pipe. Once they were far enough up they would unweight the knot and it would fall off leaving them standing on the pipe. I was taught that knot once upon a time and thought it was pretty useless. If I play around some I may be able to send out some info. (just in case you want to stand on a piece of pipe) Quote Link to comment Share on other sites More sharing options...
Thinker Posted January 11, 2005 Share Posted January 11, 2005 WOW, Chelle, that works pretty well...at least with the cord on my mini-blinds at work (the only 'rope' I have handy). The key is choosing the right loops to pull through so that it tightens thru the whole know when you pull the ends....I LIKE It. Quote Link to comment Share on other sites More sharing options...
bunglehead Posted January 12, 2005 Author Share Posted January 12, 2005 I tried it on my shoelaces at work in it worked like a champ on 2 pens! Quote Link to comment Share on other sites More sharing options...
chelle Posted January 12, 2005 Share Posted January 12, 2005 WOW, Chelle, that works pretty well...at least with the cord on my mini-blinds at work (the only 'rope' I have handy). The key is choosing the right loops to pull through so that it tightens thru the whole know when you pull the ends....I LIKE It. Have fun. I'm sure you can find some sweet SLC lass to teach it too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.