RuMR

...except B3

There is really nothing harder than 5.10+ or V2...

what is sence? is that like sensai or master?

cuz the other ones aren't 12a? sprayworthy

nah...even kevturd isn't that stupid...

Too late! whatever...i heard the milkman done it!

maybe if you had worked instead of surfin' 24/7 you'd still be employed??

are you stateside now tim?

fun timez of course!

actually, sacher cracker starts with some weird ass 5.7 offwidthy shit...hahahaha

for me, the method that workd best was make a back cut at the middle of the arch at about 45 degrees, then, gradually warm the shoe with a propane torch and CAREFULLY roll the front sole off with needle nose pliars and very quick touches with the torch. You have to be careful so as not to undo the rand to midsole glue bond. The next step was to sand clean, works better than a chemical stripper the midsole and exposed rands and the new rubber. I wore latex gloves to keep finger oils off the bonding surfaces. The next step, i used a paint brush to apply the thinnest film of barge cement that i could to both surfaces. Then, i put them in the freezer for twenty minutes to chill the glue. Line up the mating surfaces, press from the center of the shoe and work outwards in a circular fashion. Rechill the shoes for twenty minutes. Then work around the perimeter with a rubber mallot hammering it down. Then rechill overnight. Carefully grind the 45 cut seam to flush in the middle of the sole, taking care not to get the shoe hot and screw up the glue. Trim with a carpet night, then use rough grit sandpaper glued around a dowel to bring the edges to a nice tight fit with the rands. DONE... OR YOU COULD JUST SEND THEM TO RAMUTA and get back an essentially brand new pair of shoes... Done.

*snore*

*yawn*

<--Push

oh i don't know if i'd call a walrus a land animal...

actually, the grade of aluminum in the cams is not really subject to microfracture despite common belief. Steel is though, so if the axle received the impact that would be a concern...likely the cam lobes would take the hit first. Has anyone actually ever seen a "fractured" cam lobe? NO...you actually see a squashing/yielding type failure, or a bending failure in the large lobes first. carry on... oh, and mark is pretty much right. Although you can gank wires from falling over a horizontal placement. Also, I would much RATHER have a fallen/lobbed on Alien than a *new* one for obvious quality control issues...actually fuck aliens, i'll take master cams!

I didn't say she was the last either... why would he change his MO? He got away with it once... so...draconian punishments don't work? Well, mr. advanced liberal, what would you suggest?? Maybe a high-five, and an atta-boy for a successful flight?

boom! who needs courts and trials anyway? the learning his lesson thing is silly though - how on earth was he gonna rape a 2nd kid and not have it all over the place? is there anyone who said he didn't deserve jail time for what he did? of course he did. he served 40 something days and was supposed to do more - all the hub-bub was over how his plea bargain went down w/ the original judge, who seemed likely to ignore the deal and impose a much longer prison stay than had been agreed. bitching about the sentencing range for a first time sex offender is another matter. who said she was the first?

agreed! and the likelihood that she was the only one and that he learned his lesson is next to nil...

Arch, contact Dr. Larry Maurer...he's amazing...do it! His website

..one Finn, Simo Hayha, measuring in at 5 ft 3" and nicknamed "White Death" by those he hunted, in particular defied belief... http://en.wikipedia.org/wiki/Simo_H%C3%A4yh%C3%A4 iron sights no less...f-ing badass...

finns were amazing snipers...

what if they were bigger than you? there are many many ways to even a size discrepancy out, my dear finnish friend...it is a trait of our countrymen afterall, isn't it?

"forget all the bs you're spewing"? why i've never been so offended in my life. now that i'm over it, i'll say that i don't know enough about the case to make an informed opinion; my soliloquies were more about the pavlovian response i saw in many of the posts. and quite honestly, i'm not interested enough in the case to dig up all the particulars about what happened 40 years ago. and to answer your previous ?, about what i would do if it had been my daughter: i cannot, as can no one, say what they would do in a hypothetical situation. we might like to THINK we know exactly what we'd do (witness bug's travels to france and kkk's purchase of fire-arms), but in reality, it's all speculation and potentially bluster. i'd like to think i'd, as a non-christian, say a prayer for patience and wisdom, and not turn myself into a murderer, for one thing. nice dodge on a Y or N question... pavlovian = visceral = same thing...I freely admit to that... you are vulcan... i'm pretty sure, given the opportunity, that i'd beat the livin shit out of someone who messed up one of my kids...not very hypothetical...the only hypothetical would be "how to get my hands on them"....