Winter Posted August 2, 2005 Share Posted August 2, 2005 I blew out one of the trigger wires on my purple Alien during this last trip. I could probably figure this process out, but has anyone in PDX ever replaced one of these? I have the wire attached to the lobe but will need the short cable, the small swage and then the big swage on the other side of the deck. Any metal working gurus willing to donate an hour or two for some TG? Quote Link to comment Share on other sites More sharing options...
ivan Posted August 2, 2005 Share Posted August 2, 2005 mike layton recommends the fishing line replacement technique - pm him for the ultra-sketchy details Quote Link to comment Share on other sites More sharing options...
layton Posted August 2, 2005 Share Posted August 2, 2005 yeah dude... Â get some high test fishing line (you just need a bit, so you may be able to steal some from a spool when nobodys watchin' ya at Fred Meyer or Home Depot) cut the old bits of wire off with some snippers. tie a double granny knot and thread the line through, pinch hold the cam lobes together, and somehow tie a knot on the other end nice n' snug against the hole on the other lobe (the crux). Violin! Cam's fixed. Quote Link to comment Share on other sites More sharing options...
layton Posted August 2, 2005 Share Posted August 2, 2005 weed wacker wire works great on camalots cuz they've got bigger holes. melt the knots into blobs with a lighter. they've held up for years and make your cams lighter too! Quote Link to comment Share on other sites More sharing options...
paborden Posted August 2, 2005 Share Posted August 2, 2005 I've had good results replacing alien trigger wires with bailing wire. Other than being hard to work with (I have big hands), it does the job well. Quote Link to comment Share on other sites More sharing options...
texplorer Posted August 2, 2005 Share Posted August 2, 2005 Layton, you may be ahead of the game. The new Metolious cams use kevlar cord for their triggers. I am thinking about replacing my cams with some kind of cord. Quote Link to comment Share on other sites More sharing options...
catbirdseat Posted August 2, 2005 Share Posted August 2, 2005 Do you suppose 3 mm Vectran would be too large in diameter? Probably. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.