Toast
-
Posts
1437 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Toast
-
-
Yeah, the question is, is there any reason you wouldn't use it for climbing?
-
Yeah, like the second pic
-
Pretty nice shaker going on above Fremont.
-
Thanks CBS. The problem (and the virtue) of the Carrick Bend is it's slippery and unties, probably, too easily. It's also super bukly.
I'm trying to get a handle on whether the knot I described would be suitable for a cordalette or tied perlon slings, things I'll occasionally want to untie (think V-thread or tying around a big ass anchor.) I don't see why not, but that's why I'm asking the question.
-
It's common practice to use the double/triple Fisherman's Knot to join rope ends, and it's specifically used for tied Perlon slings and cordalettes. Unfortunately, it's one of the worst knots to have to untie after the knot's been weighted several times.
A friend of mine suggested the Sheet Bend (i.e. a sideways tied Bowline.)
After a little thought, I couldn't think of why not, especially with a double wrap and a Yosemite finish (sort of like how gym climbers tie in.)
Doing so reduces the arc angle of bends, thus mitigating loss of strength, and it makes this knot easy to untie. The only trade off I can think of is I don't know of anybody who uses this knot, and most won't be familiar with it.
Does anybody have any test data on the strength of this knot or the degradation of rope strength vs. the Double Fisherman's Knot?
-
Blue Balls
in Spray
Stop doing that
Don't
Stop
Don't stop doing that
-
Smacks of the DeLay headlines, huh?
-
Go ahead and cheat a friend.
-
One thing I noticed almost overnight is a huge spike in the amount of junk mail from outdoorsy and environmental campaigns, like 4 LBS of it. I suspect there's a single source for that one
-
I'll do it.
Not sure you know what you're signing up for. That's a shot from the privy
-
One more for the Snowpatch Gallery
-
If you lost a pair of these, PM me with the brand and color. I'll see if I can de-booty them from my friend who picked them up.
-
It's at LEAST 5.8d
-
Right. Now you no longer wonder. You know for a fact they do.If everyone was staring at my ass while I climbed.Archie must have a nice ass
-
Bump
-
Apologies for the newb question, but...
Why sharpen a brand new screw? They seem plenty sharp off the shelf and it would seem to open the door to screwing up the angles.
I am aware it makes sense to tune a new pick because you're essentially altering the factory set angle of the first tooth. Are you suggesting that the teeth of a screw should be similarly tuned (i.e. the factory set angles are less than ideal?)
-
You didn't specify what pack you have or what you're using it for. 25 years is pretty old, that'd put it about circa 1980. Packs have come a long way in being lighter, more comfortable, more stable and more specialized. If you provide some more info and folks can make some recommendations.
As far as replacing your hip belt, you may be able to remove yours hand replace it with something off the shelf, but chances are your pack pre dates the modular hip belt. You could take your pack into some place like Rainy Pass and they can sew a new one for you, but for what you'd spend and the end product you'd end up with, I'd consider investing in a new pack.
-
-
Yep, brrrr. I was out there this weekend. Night time temps were below freezing (frost on the tent.) South facing walls were warm enough for t-shirts. North facing walls were comfortable in the afternoon. Tieton cracks rock!
-
Striking detached thoughts?
-
Can you think of a decent pub in Yakima? The Grants Brewpub is played out.
-
-
-
Okay, so most of you already climb, but what if you're a Newbie?
Have you wondered how to get started climbing, where to get the skills to climb mountain peaks, or wondered what's involved in Basic climbing courses in the area? These courses provide a structured introduction to alpine climbing. They're not for everybody, but they might be for you.
I'll be putting on a primer to Basic Climbing Courses at the Alderwood and Seattle REI stores in November and December. I'll cover the skills we teach, how these courses are structured, and what's involved. We will have representatives from the WAC, BOEALPS, Bushwackers, OSAT and the Everett Mountaineers available to answer questions.
The dates are:
REI Alderwood: November 16 at 7:00 PM
REI Seattle: December 8 at 7:00 PM
Pass this onto your friends who might be interested
Women over 20
in Spray
Posted
Post deleted by Toast