Jump to content

Recommended Posts

  • Replies 12
  • Created
  • Last Reply

Top Posters In This Topic

Posted

I am pretty sure that temp is correct. The FL was supposed to be going up to about 10K by today and for tomorrow. I noticed that Tuesday night it got cold up there (with low forecast FL) - low 20s - but last night (Wednesday) it actually got warmer as the night progressed. I am probably going to go up toward Muir for skiing tomorrow and think that I may find the previously frozen/crusty areas to have softened = good skiing. Maybe even like spring skiing...at least I hope.

Charles

Posted

quote:

Originally posted by CascadeClimber:
So it is 24 degrees at Washington Pass, elev 5510 and 54 degrees at Paradise, elev 5410. Bizarre.

Let me know how your tour goes tomorrow. I'm interested in how close to the parking lot you can ski.

-Loren

Inversion at Paradise?

Cold front sweeping down from Canada? It is fuckin cold out here right now, must be about 3 degrees or 37 in Us temperatures.brrr. maybe the ice will freeze - naw, its gonna rain tomorrow night.

Posted

I skied to the lot last Saturday. But barely. It was quite rocky at Pan Point and there was just enough snow to avoid the asphalt and heather below. People who really cared about their skis were taking them off. If the warm air persists there won't be enough even for those of us who abuse our gear.

-Loren

Posted

Readers who are users of the NOAA - NW Avalanche Center telemetry data pages for Washington and Oregon for checking out mountain conditions might want to look at the way I have organized access to the current and archived NWAC telemetry pages on my web site. If you go to http://www.turns-all-year.com/wealinksfr.html and then click on "NWAC Telemetry" in the left menu, you will see a new menu with links for every current data page, with submenus for the 10 day archives for each location. Clicking on any link will cause the appropriate NWAC data page to display in the main window of the web page, without changing the menu and forcing you to use the back button to regain the menu. This organization lets you browse many telemetry locations quickly to determine what has been going on in the mountains and plan your trip. The inadequate navigation scheme which the NWAC provides for their telemetry pages is actually what got me started constructing my web site.

I see posts asking about snow/skiing/boarding conditions in the Cascades. There is an active trip reports section on my web site where you might find answers to such questions. You can view the trip reports here: www.turns-all-year.com/tripreportfr.html

I hope some folks find these links useful. Charles

Posted

I went up to Paradise today (Friday). I intended to get this info up earlier so it could be used for tomorrow, but I crashed upon return home. We could have skinned from the parking lot (coverage-wise), but chose to hike because the snow was frozen solid and packed on the paths (strange - telemetry said low at Paradise was 40, after a 54 degree day, and it was already feeling warm at 8:30 am). The snow on the Muir was mostly smooth ice - maybe it had rained up there previously. We stopped climbing at about 11am at 9K when it became apparent that the abundant sunshine was not going to be able to soften the snow/ice surface. The first 1000vf of skiing were mostly on the smooth icy surface. Below about 8K, however, we began to find great, spring-like corn snow where ever the slope was tilted toward the sun.

The highlight of the day came when we dropped off the ridge just above Pan Point and skied down the SE facing slopes, where the surface snow had loosened in the sun. There was 1-3 inches of silky corn on a firm base. We did another run there, then dropped into Edith Basin near the Golden Gate trail. This required a couple of steps across bare grass at one point, but otherwise it was skiable all the way to the asphalt trail at the bridge over Edith Creek. The trail back to the parking lot had compact snow, and we skied it without injuring our ski bases.

I will get photos from this trip posted by Sunday at http:www.turns-all-year.com/index.htmlCharles

Posted

>>>So it is 24 degrees at Washington Pass, elev 5510 and 54 degrees at Paradise, elev 5410. Bizarre.<<<

Yup, we had a powerful inversion going on for a while now. In Twisp last week (1500 ft elev.) lows were in the teens and it got down to 10 one night. Woke to find all the beaver ponds in the area frozen over. 3500 feet higher at Washington Pass, lows averaged 15-20 degrees warmer during that time. Looks like this pattern is finally breaking up though--let's hope the incoming wetness is cold enough to bring the fresh stuff to the hills.

Ughh--just checked the latest forecast--wet and warm for the next five days--my least favorite winter weather combo...

[ 11-11-2001: Message edited by: Uncle Tricky ]

Posted

I have been looking at the snow depth readings on the telemetry page, and I have to say that I am a bit confuded about the numbers. confused.gif" border="0

For instance, it says that there is 34 inches of snow at alpenta, (el. 3120). Yet it is 44 degrees up there. Huh???? Am I missing something. Is that like a theoretical snow depth if the rain had been snow??? I don't get it...

Here is another example; supposedly Paradise got 25 inches of snow between 1:00AM and 2:00AM! But it was 41 degrees out.

Have I just been looking at the computer for to long today, or can someone teach me how to read this thing? [Wazzup]

Posted

Snowdepth can be off, especially early season. A lot of the pages have a note to the effect on top. Like the one for paradise, says "intermittent false readings of 25 inches" on top or something like that. Caused bushes I think.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...