manky Posted August 26, 2009 Posted August 26, 2009 in a pair of Trezeta Alpinist, i was attacked by neve penitents that separated the outer rubber rand above the welt horizontally. no damage to the actual boot uppers. any thoughts on the efficacy of using shoe goo to slap a repair? any recommendations on shoe goo vs. shoe goo II? thanks. Quote
TMO Posted August 26, 2009 Posted August 26, 2009 Good question Manky. I have some approach shoes with the rand peeling... the cascadian couloir did a number on 'em. I've been thinking of shoe goo...................? Quote
Pete_H Posted August 26, 2009 Posted August 26, 2009 Use Barge Cement not Shoe Goo and apply as much pressure as you can without fucking the boot up - put it in a vise or drive over it with your car. Quote
robertjoy Posted August 26, 2009 Posted August 26, 2009 I use barge cement to repair minor peel-off or rips in the rands on my mountaineering boots. It is very effective. I use tightly pulled duct-tape to hold down the section which is being re-glued. I understand that this is exactly what a shoe repair shop would do. Quote
96avs01 Posted August 27, 2009 Posted August 27, 2009 I would use Freesole long before Shoe Goo. No previous experience with barge cement. YMMV Quote
manky Posted August 27, 2009 Author Posted August 27, 2009 FUTUE TE ET IPSUM CABALLUM and thanks for the glue Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.