genepires Posted April 25, 2008 Posted April 25, 2008 I got this fifi from kong that has a couple of slots for threading cord through in some way to make it lock off when weighted. I tried playing with cords and couldn't make it lock off. Anyone know how to thread the cord? thanks gene Quote
genepires Posted April 25, 2008 Author Posted April 25, 2008 BTW, the kong website didn't have the info. Quote
G-spotter Posted April 25, 2008 Posted April 25, 2008 I know how to thread the cord. It goes through the top of the slot, then through the hole, then out the bottom of the slot. The free end of the cord should be coming towards you once you are done. It works like a Reverso does if you set it up right - ie when its unweighted, you pull on the free end and it tightens up; when you weight it, it locks off. Use 6mm cord rather than the 7mm cord the manufacturer recommends. 7mm is hard to pull through and gets sheath damage. Tie a stopper knot like a figure 8 in the free end. Quote
snoboy Posted April 25, 2008 Posted April 25, 2008 Plus the 6mm is usually woven softer for use as prussics. Works way better. Clip the end that has the white tape in this picture: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.