aspencir

You might try Kayland Apex XT's, mine are narrower than my Scarpa Triolets. Good heel pocket, locks in well, at least for my feet.

Good idea to go in mid July, rather than in August when it turns into a pumice slog.

I was real happy with Tom Kirby of AAI as a guide on Baker last summer.

I've got an Arc'teryx Bora 40 that I like, though I never thought I'd spend that much $ for a small pack, even on sale. Only downside is that the side pockets are too small for water bottles, but otherwise alot of nice features, like the outside pocket for wet stuff, shovel, etc. For overnites I wouldn't want a smaller pack, and it handles up to about 25-30# ok.

How recent is that info?

Any news on access to Baker south side trailhead?

Last I heard on Monday, the southern access to Baker on FS Rd #13 was snowed in to about 5 miles from the trailhead, and I guess there's been more snow down low since. I'm trying to keep up on the status too, cuz headed that way the same wkend.

I've only had freestanding tents, so I can't compare. I will add that for features in a 2 person tent, I like 2 doors and 2 vestibules.

I'm just another newbie, but here's my 2 cents worth, based on limited experience. Last June my buddy and I hunkered down on Hood for about 24 hrs, with snow, freezing rain and probably 40-50 mph winds, in an REI quarterdome tent. We got alot of wind and some snow inside thru the mesh tent walls. The day before when we hiked up to the triangle moraine, it was sunny and temps in the 40's, so things can change quickly even in summer. To its credit the tent held up, but especially after going online afterwards and seeing that shortly after we bailed there were gusts up to 91 mph, we decided we needed something with less mesh and so I bought a NF Mtn 25. It's probably overkill, and I know there are tents just as storm-worthy which weigh less, but we'll try it out on Baker soon. So I guess I have to agree w/ Lou Whittaker that saving weight in a mt tent by using alot of mesh, is like saving weight by drilling holes in your spoon. Many many times I've wondered about what we'd have done if we'd stayed another night up there, and the tent would've ripped to shreds......in the dark, 91 mph winds, 2 feet of new snow,and the temps dropping.

Keep a close eye on the weather, and if you camp above the lifts on the moraine, look for any rocks that will help block the wind. Shortly after we bailed off there in the middle of June last year, the wind hit 91 mph, the temps dropped to 20, it snowed about 2 feet (not that any of it probably stuck), and a dayhiker died on Rainier. The day before it was sunny and in the 40's, and people were heading up in shorts.

You're looking at the 11/27/96 recall notice; there's another dated 3/7/97 for date codes on any CFBP's w/ date codes under 7009. My bent shaft tool has a 9000 series code, and my straight shaft tool has a 6000 series code. Go to mountaintools.com/techtips for both notices.

Scared, thanks for the constructive comments. I took the tool subject to the recall apart again, cleaned off more grime, and found what look like the initials "CB" engraved after the production code 6288 on the inside of the shaft head. So it appears that a previous owner (not the guy I bought it from) shipped the tool back in the day to BD, which tested and returned it. I never expected to take undue advantage of BD over this recall, I didn't want to try to make money reselling new Vipers on the internet, I just want(ed) to keep both tools if they aren't defective. Not to worry, I'll talk to Elmo again this wk about the new info and we'll figure something out.

Wonder how I'd tell if the one in the suspect series has been tested way back when? You'd think they'd mark them somehow. Waiting to hear back from Elmo, and certainly not unhappy w/ BD.

Thanks for the "hands on" constructive advice. I've been dealing w/ Elmo, but I'll try your suggestion. I'm not trying to rip BD off, even if I could turn around and make some $ by selling a pr of vipers, and would be happier to find out my tools test out ok. How long ago did you have yours tested? Wondering if they still have the equip or capability to do so.

Correct, I couldn't have said it better myself. Thank you.

I agree, BD has been great, couldn't ask for nicer folks. But one of the tools isn't even in the recall number range. I already asked if they had any old x-15's, shrikes or rubberized prophets laying around that I could trade for, but no luck. If I take the deal, I'll have to sell two new vipers that I didn't get for free (I don't expect that), so maybe I'll just do that and hope for the best. What am I bid? I was hoping someone had experience w/ recalled CFBP's.

So far it's a nice offer to discount the price of new tools, but I didn't want to spend that much money, which is why I shopped for used stuff. I wish they would just test the tools, and rebuild or replace, like they used to. Since there's no sign that the heads are separating from the shafts so far, I'd rather keep them if the only downside is slight risk they'll loosen.

I knew a guy who came across someone coming down out of the cab of one of his logging trucks with a radio in his hands. Neither the theft nor the beating were ever reported.

I just bought a lightly used pair of carbon fiber Black Prophet tools, one straight shaft and one bent, and then messing around on the internet found an old Black Diamond recall notice. The straight shaft tool looks to have a number within the recall range. When I called BD customer service they said they were dangerous and I should send them in right away. They're the ones with only 5" of rubber coating. Nothing is cracked or loose, should I be worried that they'll explode in my hands?

by the way, sorry, but i meant american alpine institute. and yeah, we plan to put our own group together, even if it's just 3 of us.

some friends and i from minnesota were out to mt adams this year on our own, would like some expert instruction (beyond reading freedom of the hills)before trying anything like baker, hood or rainier, and were thinking about classes/ascents with american alpine int'l, like their rainier prep class or guided ascents of ruth, sahale and/or shuksan. any thoughts?

some friends and i are hiking the south route this wkend for the first time. any suggestions as to footwear? i have garmont flash xcr's and tecnica cruisers. both fit my crampons, but the tecnica is more of a mountaineering boot.