Christopher Fisher
Members-
Posts
3 -
Joined
-
Last visited
-
Days Won
2
Christopher Fisher last won the day on October 15
Christopher Fisher had the most liked content!
Christopher Fisher's Achievements
-
Trip: Vesper Peak - Ragged Edge - Rockfall Beta - Ragged Edge Trip Date: 10/12/2024 Trip Report: TLDR: Recent rockfall on Ragged Edge has made the climb even more ragged. Summary at bottom. I followed Ragged Edge on Vesper Peak last year, and I decided to wrap up my alpine season this year with a victory lap leading Ragged Edge on 10/12 to celebrate my hard earned leading skills. Reading up on the beta, I discovered that sometime last month (first mention I saw of it was Sep 17th), rock fall at the pitch 4 anchor modified the route. Beta on how the new route is still minimal (best report I found on Cascade Climbers here), but what I found implied the route was still climbable. So I decided to go check it out and try to write up a more detailed report on what changed. I don’t imagine too many more attempts will be made on Ragged Edge on Vesper Peak this year, so this is more of a heads up to next year. This is my best guess of the rockfall that occurred (picture taken from a screenshot of this video) Having climbed it, and because the new route has now been gardened a bit, I did not think that the difficulty of pitch 4 has been impacted (I would say that 5.7 is still reasonable). The main difference is that you now have to do face climbing to get to the anchor. Protection opportunities were limited, but still there. ***Beta Ahead*** There is a thin crack vertical system where I managed to put a size 3 or 4 nut. Above that, there was a small crack that you could probably place a .75 cam (I didn’t place because I put my foot there), and higher up, I was able to get a sub par .5 cam in (crack wasn’t very deep to get great teeth engagement). See pic below for my nut and cam placement.***Beta Done*** Top is pre-rockfall (screenshot from here), bottom is current I did not see any obvious signs of damage to the pitch 4 anchor (I don’t think the rock that fell was ever directly connected to the wall the anchor was on). And the only impact I saw to Pitch 5 was the first move to get onto it. I really struggled with finding a remotely ergonomic position to belay from. Here is a pic of me belaying, and I recommend flipping positions from what I did to the position shown in the post I referenced above, because the way I was positioned resulted in the rope going over my leg while belaying. The start of Pitch 5 is what I would call the new crux of the route, though difficulty will be quite dependent on your height and arm span. To add to the difficulty, a fall at the start will drop you over the edge. At about 6’, my partner made it look pretty easy to make the transfer over. At 5’7”, the move was close to my full arm span, and I thought the transfer quite challenging. I’d personally put that single move at 5.9. A recommendation to the leader, is after making the transfer over, to place the first piece as high as possible in the first crack system, so as to reduce the risk of follower going over the edge if they fall on the first move. ***Beta Ahead*** This is roughly what I did to transfer over to pitch 5. Just up and to the right of the anchor there is a vertical edge for your left hand, then there is a very small divot in the wall roughly halfway across that you can put your right foot. From here, I was able to reach over and grab the right side (another vertical edge). Then with my arms near full span on the holds, I swapped to my left foot on the divot, then (it gets a little hazy), I took my left hand off the hold, and with most of my weight on that left divot, very carefully moved my left hand and right foot over to the crack system and pulled myself up onto a nice step on the side of the crack system. ***Beta Done*** Left is new route, right is old Due to how popular this climb is, I think there are a few adjustments that could be made to keep the route at about the same grade. To start, moving the pitch 4 anchor up 3-4 feet would make belaying much more comfortable. Also, because of how committing the move to the start of pitch 5 is now (if you fall before placing a piece, you’re going over the edge), I think it also makes sense to add a high bolt between the pitch 4 anchor and the crack system at the start of pitch 5. This would help reduce the risk of you going over the edge if you fall on the first move, and could also be potentially used to “aid” the first move if you don’t have the arm span to make that transfer. This way the climb won’t have a new crux that is potentially significantly harder than the rest of the climb. I would also keep an eye on the remaining stacked blocks that are on the route of Pitch 4. They did not appear to be connected to the section that broke off, but they did appear to take a glancing blow on the side when the rocks fell. I did not see any obvious signs of rock shifting, but it was definitely a little unnerving climbing that section, knowing that another section just above it broke off the wall. Summary: -Rock fall modified the end of Pitch 4, but not in a way that I thought changed the grade at 5.7 -I did not see any obvious damage to the pitch 4 anchor -Only the first move of Pitch 5 has been impacted, and depending on your height and arm span, might be the new crux of the climb. At 5’7”, I thought the transfer quite challenging at 5.9 (or maybe a touch higher). -Current belay at the pitch 4 anchor is quite awkward. Adding an anchor 3 feet up would make it much more comfortable. -Because of how committing the move to the start of pitch 5 is now (if you fall before placing a piece, you’re going over the edge), I think it also makes sense to add a high bolt between the pitch 4 anchor and the crack system at the start of pitch 5. -I would keep an eye on the remaining stacked blocks that are on the route of Pitch 4, to make sure they don’t start shifting too. A few good links showing the rock section that fell: Old Pitch 4 belay stance: https://youtu.be/v7txavGSxUY?t=223 Old start of Pitch 5: https://youtu.be/3LhEzi3i8go?t=170 Old start of Pitch 5 (with a 360 camera): https://youtu.be/RIifPYskm-Q?t=58 Looking down at the Pitch 4 anchor: https://youtu.be/twQmCoWF_dA Drone footage of the face (will need to pause, and possibly go frame by frame to a view of the side): https://www.youtube.com/watch?v=vOYiEt3aCFA&t=29s Gear Notes: Unchanged, except maybe also bring a small nut in the 4/5 size range for the new end of pitch 4. Approach Notes: Unchanged
-
Trip: Mount Triumph - NE Ridge Trip Date: 07/13/2024 Trip Report: TLDR: The snowfield crossing to the NE Ridge still has significant objective hazards. I would expect hazards to be similar for a little while longer before enough snow melts/sloughs off that the risk is minimized. I believe I can claim the first trip report of Mount Triumph in 2024. Sadly, I can’t claim the first summit of the year. I was a part of a team of 4, and our plan was to climb Mt Triumph over 2 days, camping at the bivy site 2 pitches up the start of the NE Ridge climb. Our timeline was as follows: Depart Seattle Area 4:00 AM Leave Thornton Lake Trailhead 7:15 AM Reach the first Thornton Lake 10:15 AM Arrive at the top of the Saddle above the 2nd Thornton lake. 2:00 PM Arrive at the base of the notch 3:45 PM Departed the base of the notch 5:15 PM Returned back to the Saddle above the 2nd Thornton lake. 6:15 PM Back to the trailhead 11:15 PM Conditions on the way to the climb: -The trail up to the first lake is well maintained -The trail to the 2nd lake is a little bushwacky, but there is a defined trail up to it -There were a couple creek crossings, all were manageable (trekking poles were nice, but not required) -After the 2nd lake, you need to cross a boulder field that then transitions to heather/scree as you go up the col to the saddle above the 2nd lake. I’d recommend hugging the cliff to climbers right as you go up; the heather is easier than the loose rock and there is a faint trail to follow. Above the heather you get into much more loose rock, and though manageable, it becomes rather difficult to avoid dropping rocks on team members below you. -For the time being, there is still plenty of snow and running water nearby this saddle if you plan to bivy here. -The snow crossing was by far the most challenging part of the approach. After reviewing the objective hazards for a bit, and debating the best path, we opted to follow relatively closely to what I had read most trip reports follow, which is along the bench that leads to below the notch. Only one part of the bench showed any signs of recent snow/ice fall, which was unfortunately at the end, where we couldn’t travel too far below it since we need to start going up the face to get to the notch. We opted to move as fast as possible to minimize our time in the hazard zone. Even trying to minimize exposure, we still had a bit of excitement as some snow blocks broke off while our last team member was under the main hazard zone. Thankfully the snowfall behaved as we expected (if it were to fall) and stopped short of our crossing path. So the team member wasn’t in direct danger, but it certainly looked like it, and in the process of trying to get out the way, they unfortunately sliced their leg with a crampon. We took a break on a rock outcropping directly below the notch to bandage up the leg, and decide what to do. We decided the injury was significant enough that we didn’t want to spend another day on the mountain, and planned to make the descent back to the trailhead. We had dinner on the little rock outcropping, and spent the time re-evaluating our path on the snowfield. We saw one more exciting ice block fall, this time off the old glacier. This block made it all the way down to the bench that we crossed, and because of that, when we headed back we decided to traverse below the bench to better stay out of the path of any potential snow/ice fall. The snowfield was shaded on our way back, which helped with snow/ice fall risk. Also worth noting, the mosquitos were bad on the way up in the heat of the day, but were downright miserable on the way back; didn’t matter if we were stopped or moving, they followed us relentlessly. DEET had a minimal impact, I’d recommend bringing a bug head net. Lessons learned include: - We picked about the worst time of the day to cross the glacier (hottest/direct sun). Unfortunately, if you are trying to do Mt Triumph in 2 days, it’s very challenging to avoid crossing this snowfield mid/late day; your best bet is to wait for the sun to dip below the peak of triumph and cast a shadow over the snowfield, which happened around 5:15PM for us. You can push the first crossing to early in the morning day 2, but that will just push back the 2nd crossing on the way back. -We opted to rope up the first time we crossed the snowfield. This was to have a chance of protecting against additional glide avalanches. But because we were roped up, the last person on our team spent the longest time under the primary hazard zone as the steepness increased significantly above that zone and those of us in the front of the rope team slowed down on the uphill. This is why we opted not to rope up on the way back 2nd Thornton lake, col you go up on right First good view of Mount Triumph and the snowfield you need to cross View of the crossing we took on the way out (red), and back (blue) based on our changed opinions of the biggest objective hazards. Red X is far as we got View of our path from the opposite side Gear Notes: -Crampons were quite nice for the snow crossing, even with the heat the snow had some spots on the traverse that were quite firm -Brought a decent sized trad rack, but I didn't actually use it (so can't give any feedback there) Approach Notes: GPS Track available on Peakbagger: https://www.peakbagger.com/climber/ascent.aspx?aid=2573855 I also shared a few more pictures on the PNW Peakbaggers Facebook page: https://www.facebook.com/groups/209335589972834/?multi_permalinks=1572843873621992