Jump to content

JohnWang

Members
  • Posts

    1
  • Joined

  • Last visited

    Never

Converted

  • Occupation
    Daydreaming
  • Location
    California, USA

JohnWang's Achievements

Gumby

Gumby (1/14)

0

Reputation

  1. I was actually on the summit taking photos for the climber who fell on July 1 before the accident. Based on my observations I would make some corrections to the above: (1) The climber fell into a fumarole/crevasse and NOT the bergscrund. Photo on www.SummitPost.com. (2) PMR, USFS Climbing Rangers, and AMR did NOT excavate the climber. A group of 15+ volunteers excavated the climber because it took the first climbing ranger 4.5 hours to arrive at the Hogsback. AMR and PMR followed within the next two hours. Among the volunteers were two off duty climbers from Western Montana Search and Rescue and an off duty airborne medic with the Army National Guard 1042nd (they do seaches in the 3 Sisters area). Volunteers also rigged a ski/rope litter to bring the climber to the Hogsback because no litter was available from PMR/AMR/USFS until later when the climber was transferred and then lowered down to 9100 ft. PMR/AMR were able to assist after the climber had already been excavated and brought to the Hogsback. (3) A helicopter did NOT lift the climber off the volcano but two news helicopters did spend hours taking video footage of the rescue. The USFS had clearance to send a helicopter but chose NOT to because the injuries were not life threatening. After the climber was lowered to 9100 ft. (7 hours after the fall), he was evacuated from the mountain via snowcat to the Timberline Lodge parking lot where he was transferred to an ambulance. (4) The climber was NOT from the Midwest, but from the East Coast - somewhat immaterial. It appeared that the most serious injury the climber suffered was a broken ankle. More information and photos of this accident/rescue are available on www.SummitPost.com. There is a sequence of 4 Mount Hood photos with captions that should give you a pretty good idea of what happened. [This message has been edited by JohnWang (edited 07-17-2001).]
×
×
  • Create New...