Jump to content

Petzl Pro-traxion device


Dan_Miller

Recommended Posts

From today's (03/16/09) NPS Daily Ranger Report.

 

This is posted for your information and discussion. I've no experience whatsoever with this particular Petzl hauling device, so can't speak with any authority on it's useage. This will be left to others who have some knowledge of it.

 

 

Zion National Park, UT

Results Of Investigation Into Climbing Fatality Released

 

On October 17, 2008, James Welton fell to his death while climbing the Touchstone route in Zion National Park. The National Park Service subsequently conducted an investigation into the cause of the accident in cooperation with the Washington County Sherriff’s office. Their findings have been released. The three-person climbing party had climbed three pitches (approximately 180 feet) without significant event. When the member leading the fourth pitch had reached the pitch’s top anchor, he tied the end of a rope into it. The climbing party’s gear, weighing 104 pounds, was attached to the bottom end of this rope, which was to be used as a haul line. The climbing partner then ran the haul line, which was also Welton’s ascending line, through a Petzl Pro-traxion device, a pulley which incorporates a cam allowing for rope capture as rope is hauled in. The climbing partner pulled 15 feet of slack through the Pro-traxion prior to Welton starting his ascent. The group planned to haul the gear to the top of the fourth pitch after Welton, the second climber, had completed his ascent. The third party member planned to ascend a second rope, the leader’s lead climbing rope. Welton’s fall occurred when the Pro-traxion failed soon after he started to ascend the haul line. The Pro-traxion operates with a cam and pulley mounted to a fixed plate. A sliding plate allows a rope to be inserted into the device. When the sliding plate is properly closed, a button locks the device together. NPS investigators were able to reproduce the failure of the Pro-traxion during informal tests when the device was closed improperly. They noted that the device could appear to be properly closed (but not truly closed) if the device was weighted prior to the side plate sliding into place. When improperly closed, the device can deform when weighted, causing rope to move rapidly past the cam in the unintended direction. When the Pro-traxion failed, the 15 feet of slack ran rapidly through the device, causing Welton to fall this distance while still attached to the rope by his mechanical ascenders. The force generated by the fall transferred to Welton’s ascenders, which severed the rope, resulting in Welton’s tragic fatal fall. [submitted by Ray O’Neil, Plateau District Ranger]

 

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

This was a complete misuse of the protraxion. The rope should have been secured directly to an anchor with an alpine butterfly or figure-8 before being ascended. Ascending directly on the protraxion or any other hauling device is an inherently bad idea.

Link to comment
Share on other sites

could this have happened if a biner was put in the lower 'safety' holes of the protraxion? seems unlikely - but don't have it in front of me right now.

 

 

i know there is a lot of folks that think the protraxion is a deathwish already - this event won't help that situation - but i agree w/ jh, that this was a miss-use thing

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...