fenderfour Posted November 20, 2007 Share Posted November 20, 2007 I made 3 of these that I don't need. These are $40 each. I know, it seems like a lot. After materials and the cost of shipping the components is covered, you will be paying me about $6 for the time to stitch one of these up. I'm not interested in shipping. I'm terrible about getting to the post office in a timely fashion and I end up feeling guilty about it. I live in Seattle and work in Everett. We can arrange pickup anywhere between the two. The mini carabiners are made of stainless steel. They have a working load limit of 260 lbs. (locking carabiner shown for size, not included) The swivel is rated around 250 lbs WLL. The webbing is 1/2" mil spec. The seams are covered in shrink tubing to protect the stitching and prevent it from getting caught on things. Quote Link to comment Share on other sites More sharing options...
kurthicks Posted November 21, 2007 Share Posted November 21, 2007 how long are they before stretching? after? Quote Link to comment Share on other sites More sharing options...
fenderfour Posted November 21, 2007 Author Share Posted November 21, 2007 I haven't measured them. They are long enough to reach as far as I can (I'm 6' 3") and a bit more, and as short as I could make them without putting undo stress on the eleastic. I can measure when I get home. Quote Link to comment Share on other sites More sharing options...
fenderfour Posted November 26, 2007 Author Share Posted November 26, 2007 33" normal 51" stretched Quote Link to comment Share on other sites More sharing options...
fenderfour Posted December 5, 2007 Author Share Posted December 5, 2007 -bump- I've got one of these left. Quote Link to comment Share on other sites More sharing options...
jclark Posted December 5, 2007 Share Posted December 5, 2007 check pm's Quote Link to comment Share on other sites More sharing options...
fenderfour Posted January 27, 2008 Author Share Posted January 27, 2008 -Bump- I see a lot of ice climbing going on. I made two more of these. Quote Link to comment Share on other sites More sharing options...
fenderfour Posted January 27, 2008 Author Share Posted January 27, 2008 Sale pending on both Quote Link to comment Share on other sites More sharing options...
onawym Posted January 28, 2008 Share Posted January 28, 2008 check PM's Quote Link to comment Share on other sites More sharing options...
fenderfour Posted January 29, 2008 Author Share Posted January 29, 2008 I will make some more of these if folks are interested. I'm not making these for profit. I'm providing a service to all you leashless fools out there. Post here or drop me a PM. Quote Link to comment Share on other sites More sharing options...
DPS Posted January 29, 2008 Share Posted January 29, 2008 That is some beautiful workmanship. If I did the leashless thing I would buy one. Quote Link to comment Share on other sites More sharing options...
ZimZam Posted February 12, 2008 Share Posted February 12, 2008 I got mine today. He makes a nice product. Gettum' while they're hot. Thanks FF. Quote Link to comment Share on other sites More sharing options...
pup_on_the_mountain Posted February 27, 2008 Share Posted February 27, 2008 So, I asked FF to make one for me, and he says he'll do it if there is enough "demand". At this point, two people have asked him (including me). Looking for 2-3 more folks. Any one else interested? Quote Link to comment Share on other sites More sharing options...
tvashtarkatena Posted February 27, 2008 Share Posted February 27, 2008 Just got mine last night. Very nice piece of gear. Quote Link to comment Share on other sites More sharing options...
Dane Posted February 28, 2008 Share Posted February 28, 2008 Make a fashion statement.. Quote Link to comment Share on other sites More sharing options...
kurthicks Posted March 1, 2008 Share Posted March 1, 2008 I'll take one...BD isn't coming out with one until Fall 2009 from what I heard. Quote Link to comment Share on other sites More sharing options...
fenderfour Posted March 1, 2008 Author Share Posted March 1, 2008 Crap. That's #4. I will make another batch. Quote Link to comment Share on other sites More sharing options...
Dane Posted March 1, 2008 Share Posted March 1, 2008 I'd like two as loaners for my partners if you are making some up. Always fun to see a umbilical in use Quote Link to comment Share on other sites More sharing options...
toph Posted March 2, 2008 Share Posted March 2, 2008 I'll take 1, check PMs. Quote Link to comment Share on other sites More sharing options...
elliottwill Posted March 2, 2008 Share Posted March 2, 2008 Where'd you get the minibiners? Quote Link to comment Share on other sites More sharing options...
Chad_A Posted March 2, 2008 Share Posted March 2, 2008 (edited) Hey, I will certainly take one as well, if you're willing. anderson7149ATcomcastDOTnet Cheers, Chad PS- I'm willing to come up there to pick it up, if you're not into shipping. Edited March 2, 2008 by Chad_A Quote Link to comment Share on other sites More sharing options...
dbb Posted March 2, 2008 Share Posted March 2, 2008 btw, you might consider using a full strength mini biner instead. stronger and lighter. the camp nano 23 comes to mind: http://www.rei.com/product/764094 Quote Link to comment Share on other sites More sharing options...
Dane Posted March 2, 2008 Share Posted March 2, 2008 (edited) Dave the swivel on Fender's rig is rated to 260# so the mini biners at 250# are actually right were they need to be and maybe a bit more You'd be hard pressed to get a 250# load on one of these if the sizing is correct, short of a full body weight fall directly on to just one tool. Fender I really do want 2 of your rigs and think they are a bargain for the labor involved @$40. But for those that think $40 a bit steep. I use 1/2" webbing with a bungie "linked" to my harness by an overhand knot through the tool end and a 880# "chain link" to my harness. The chain link takes both tools. For short sections of piolet canne I just deal with it hooked up. If I need to do a lot of piolet cane before or after a route I unhook one tool from my harness and either simply drag the umbilical or pull it through the carabiner hole on the tool head. Either way works fine. A treking pole might well be a better answer. Being tied in all the time works well for technical climbing where I don't anticipate hooking and unhooking my umbilicals to use the tool for plunging (like at the base of a cornice) or piolet cane. But you can do either easily enough while still tied in. Plunging being the more difficult of the two. Marmot in Bellevue was the only shop locally I could find 1/2 tube. REI has the 1/8" elastic. Lowe's has the links in the hardware department for a buck or so each. My tie in link is rated at 880#. The smaller link shown is rated at 660#. The smaller link also makes a good tool attachment point. This is what I use ... cost less than $10 for the set, part of an old wire coat hanger to thread the elastic and 15 minutes of your time. And a comparison with other biners including the Nano... Other ways to attach to the tool depending on what you need. FWIW..I have been using umbilicals on technical tools for a long time. My original use was as a traveling backup belay and to avoid tool loss. IMO they really don't come onto their own until they are on a system that was designed to be leashless. The pic below shows Marko Prezelj on N. Twin during the 2nd ascent of the Lowe/Jones with Steve House. Having a tool dangling off the umbilical might well be an slight tactical error, but more likely from my limited experience this winter with leashless tools, it might just be the position of choice. Some times you just want the damn thing out of the way...and can clip it in later. And my original intended uses are not negated. Leashless is all about freedom of movement. Adding umbilicals, surprizingly to me, can actually add to that freedom. Edited March 3, 2008 by Dane Quote Link to comment Share on other sites More sharing options...
fenderfour Posted March 3, 2008 Author Share Posted March 3, 2008 If you want to make your own, I get the swivels and snaplinks from these guys: Bosun Supply Quote Link to comment Share on other sites More sharing options...
fenderfour Posted March 3, 2008 Author Share Posted March 3, 2008 btw, you might consider using a full strength mini biner instead. stronger and lighter. the camp nano 23 comes to mind: http://www.rei.com/product/764094 I looked at all of the available miner 'biners and didn't like the bulk that they added. I also wanted a clip with a captive eye. 250 lbs working load limit means a 1000 lb breaking strength. These are plenty burly to hold your tools. Which brings up another point - If you bought one of these from me, you must understand that it is only to prevent a tool form being lost. It is not to be used as part of an anchor or to support bodyweight. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.