Jump to content

CCH Aliens Recall Notice


olyclimber

Recommended Posts

Colorado Custom Hardware, (CCH) has recently completed an investigation and extensive testing to identify and isolate safety issues concerning the brazing on CCH Alien cams. The safety of our customers is our number one priority.

Testing has revealed that there was a brazing issue with specific cams made after November 2004. The units to be identified are marked with a small center punch dimple at the base of the round ball where the axle goes through the cable eye. Although few failures have been reported, CCH recommends immediately discontinuing the use of any Aliens with this mark. CCH is recalling the cams with the identifying punch mark. Please return them to CCH for a new replacement unit. You can mail your cams to:

Colorado Custom Hardware, Inc

ATTN: Brazing Recall

115 E. Lyon St

Laramie, WY 82072

If you are not sure if your cams are included in the recall, please contact us at

(307)721-9385.

We sincerely apologize for this inconvenience and we are doing everything possible to correct it quickly. There will be a photograph on our web site to help to identify the cams that need to be returned. The Web site address: Aliencamsbycch.com

Sincerely,

Colorado Custom Hardware, Inc

115 E. Lyon St

Laramie, WY 82072

 

EXAMPLE from cch site:

orange_dimple.jpg

 

EXAMPLE provided by olyclimber:

4342defectivecam_013i.JPG

 

For discussion, go to the climbers board.

one of a couple threads.

Link to comment
Share on other sites

  • Replies 0
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Guest
This topic is now closed to further replies.



×
×
  • Create New...