Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 09/20/21 in all areas

  1. David Whitelaw and I finished this new route on August 4. Jim Nelson was in attendance to take some photos, but did not climb it with us. The route is called Indentured Servant, and is located 100+ yards left of Tooth Fairy. It's a sport route of five pitches, all bolted, like this: P1 some sustained 5.10a, 12 bolts P2 5.7, 9 bolts P3 5.8, crossing a giant chockstone, 6 bolts, P4 5.10b, reachy stemming up a V-slot, 12 bolts P5 5.9, sustained .9 face climbing for over 30', 6 bolts We built it to climb and rappel with one 60m rope. For P1 we extend two of the clips with alpine draws to avoid drag (see photo). Rappel the route until P2, then drop straight down into the deep gully where there is a final anchor. The route finishes on the North ridge, so you can traverse right and up to the summit. One could also walk off the North Ridge route. All bolts are 3/8" SS wedge bolts. Belay/rappel anchors are either SS chain w/ ring or two bolts with rings. The first person to climb it besides David and me was Ken Ford, on Aug. 12. Then David's friend Kelsey Gray from AK joined us for a couple of days of exploration, and they climbed it together on Sept. 2, while I took a rest day in camp. Then I brought up Robin Taft for an outing of Tooth Fairy the first day, and this route the next, on Sept. 12-13. Here is Ken Ford finishing P1, showing how the rope takes a nice curve if bolts 6 and 7 are extended David W. has drawn one of his beautiful topos for this, but we won't publish until next year. One doesn't need a topo to climb it, however, just find the clean toe of white rock to the left of a major gully, and follow the hangers. Bill Enger
    3 points
  2. Trip: Chiwaukum Range - Chiwaukum High Route Trip Date: 09/09/2021 Trip Report: This definitely isn't alpine climbing, and nothing exceeded class 3, but I think it is kinda interesting... John Berude and I completed a high traverse of the Chiwaukum Range in a single push. We started at the Lake Ethel Trailhead and ended at Hatchery Creek, summitting Big C, Big Lou, and Big Jim along the way. It was definitely the hardest high route thing I have onsited in a day and one of the best days I have had out there with the scenery and fall colors. It measured 32 miles and 14k ft gain, mostly off trail, and took us 16 hours. Full TR: https://climberkyle.com/2021/09/09/chiwaukum-high-route/ The most interesting part was getting between the Glacier Creek and South Fork Chiwaukum drainages. We utilized the pass to the east of Pt 7955. The south side of the pass looks improbably on a topo map, and there is indeed a cliff there. But one can follow ledges westward and through the cliff band miraculously. A beautiful morning in the Chiwaukum. Above Cup Lake. Some exposed scrambling on Big C. The beautiful Glacier Creek drainage. Looking back on the key ledge that gets you through the cliffs near Pt 7955. Vibrant orange near Cape Horn. On the summit of Big Lou. Nearing the summit of Big Jim. Gear Notes: Running shoes, poles, running vests. Approach Notes: Leave Lake Ethel Trail right before going down to the lake and enter the alpine! Hatchery Creek has over a hundred blowdowns.
    1 point
  3. A couple of DIY ice axe/tool carry options for packs with just a daisy chain system. A simple loop will work with and ice axe or tool that had a full size hammer or adze. I made some toggles out of aluminum similar to the Arcteryx packs. They'll hold an ice tool head if the hammer or whatever is too small to get captured by just a loop. Any toggle that will fit through the head on the narrow side but is still long enough to sufficiently hold the head will work. Plastic or metal toggles that get used for clothing can be found online. A loop of shock cord and a cord lock is used to hold the shaft of the axe.
    1 point
  4. Nice report and pics! Your annotative efforts should ease some pilgrimages, but only so much ... that zone around Despair is quasi-Pickets. An interesting fact, as you likely know: the line you climbed (and peak) was Beckey's first, first ascent. Climbed that same route (or something like it) with snow on it earlier this year, also recommended. Whatever the season, it's a substantial journey with a payoff--such a beautiful area. @JonParker: After rat and I climbed N Despair via its eastern buttresses ("bipolar buttress", TR on this site), we descended to the notch between the two summits before dropping to the west and exiting via Triumph Pass etc. A continuation of the climb up the N ridge of the S summit looked feasible; it might require some roped climbing. Lacking time, we left that on our to-do list--would love to hear about someone sending it. Here's a pic of the N side of the south summit from near the notch: https://photos.app.goo.gl/cuomjfrLnMmgUCpY7
    1 point
  5. A few no-sew dcf stuff sacks using instructions from the video above. I use the .5" double sided dcf tape from ripstopbytheroll.com. I make the reinforcement patches by applying the tape to the fabric and then cutting a patch out and then peeling the last paper strip off the adhesive tape. Then I just apply it like a piece of tenacious tape or whatever tape style patch material. For those of you who don't want to pay for the dyneema stuff and maybe just would like to pick up some light nylon ripstop, 3M makes a double sided tape that bonds to fabrics with a PU (polyurethane) coating as well as dcf. It does not work with SIL coated fabrics. It's called "3M 9485PC". https://www.rshughes.com/p/3M-9485PC-Clear-Transfer-Tape-1-In-Width-X-60-Yd-Length-5-Mil-Thick-Densified-Kraft-Paper-Liner-63477/021200_63477/?gclid=EAIaIQobChMI4-3P0O6g4gIVCMDICh1QwQhTEAYYAyABEgJs__D_BwE&utm_source=rshgs&utm_campaign=021200-63477&ef_id=EAIaIQobChMI4-3P0O6g4gIVCMDICh1QwQhTEAYYAyABEgJs__D_BwE:G:s&s_kwcid=AL!4414!3!207031288217!!!g!335067319566! If you don' make want to make stuff with these tapes, they still could be used to make repair patches. They would end up being more permanent than tenacious tape or some of the other tapes people use. A bead of seam grip around the edges of any tape patch will prevent peeling and add another level of durability. A few things to note would be that for maximum strength these taped seams need to rest a few days to bond fully. They also destabilize or loose strength in temperature extremes. As far as most stuff sack applications or most repairs are concerned, it's not really an issue.
    1 point
  6. Looks like you hit the nail on the head with what I would also consider a good climbing pack. Heres my most recent 30l climbing pack I made, blending what I like about Cilogear and Alpine Luddites: Very similar and just slightly smaller than a cilogear 30l. Used a different closure system because if the pack has a removable lid, I'm often not using it. Permanent lids tend to work better I think, less flop factor. The body of the pack is made from a newer woven dyneema hybrid (around 45% dyneema). The stuff is bomb proof (and expensive...), got bored trying to wear a hole in a test scrap with 80 grit sandpaper. So far It's been out for one climb and a few ski tours this winter.
    1 point
×
×
  • Create New...