Jump to content
  • Announcements

    • olyclimber

      WELCOME TO THE CASCADECLIMBERS.COM FORUMS   02/03/18

      We have upgraded to new forum software as of late last year, and it makes everything here so much better!  It is now much easier to do pretty much anything, including write Trip Reports, sell gear, schedule climbing related events, and more. There is a new reputation system that allows for positive contributors to be recognized,  it is possible to tag content with identifiers, drag and drop in images, and it is much easier to embed multimedia content from Youtube, Vimeo, and more.  In all, the site is much more user friendly, bug free, and feature rich!   Whether you're a new user or a grizzled cascadeclimbers.com veteran, we think you'll love the new forums. Enjoy!
Sign in to follow this  
mgetlin

[TR] Illumination Rock - East Ridge-ish Thingy 12/13/2016

Recommended Posts

Trip: Illumination Rock - East Ridge-ish Thingy

 

Date: 12/13/2016

 

Trip Report:

Timmy and I opted for a little winter adventure climbing and got all we bargained for! Our original plan had been to try Iron Maiden but the east ridge was too tempting to pass up.

 

Our route followed the left skyline more or less. You can see me belaying about a third of the way up on a small flat spot.

IMG_3698.JPG

 

 

After a leisurely skin up from the lot, we switched to mountain boots and dumped our skis and all but the essentials. I opted for my BD Snagletooth crampons, which proved to be a mistake (more on that later). We also brought every known piece of climbing pro, which proved not to be a mistake (more on that later).

 

We started just west of the foot of the ridge, inside the south chamber. Timmy led a crumbly rime gully up and onto the ridge top where we built something that was clearly meant to resemble an anchor. Staying just a few feet left of the ridge crest, I set out on the second pitch which involved quite a lot of tunneling through vertical/overhanging rime in choked corners. Without enough ice for screws, I did the gopher dance and dug down to the "rock" in search of placements which proved few and far between. My aluminum horizontal front point caused issues as it wouldn't bite in the brittle water ice under the rime. I had a few feet cut superman moments that made for some cursing and introspection about my life decisions. A KB, one stubby, a specter hammered into a seam, and a pink tricam later, I scummed my way to a ledge and built a bomber rock anchor.

 

Looking back down the crux chimney

DSC003391.JPGDSC00346.JPG

 

After a good chuckle at the absurdity of our chosen form of recreation, Timmy set off on what became a moderately heinous two pitch top out.

 

Timmy leaving the belay

DSC00354.JPG

 

Apparently he meandered onto a large leaning rime cornice which, after thinking better of it, he downclimbed and circumnavigated to the left. This was followed by an unnerving 75 degree rock slab covered in 4 inches of fluff, and a crumbling chimney in which he ran out of rope, triggering a slew of obscenities that I could (fortunately) not hear.

 

It didn't look bad from below...but it was.

DSC003561.JPG

 

After topping out, we slung a big pile of snow and rapped off the bollard. The second rap was a rock anchor (and I'm not mentioning what we left cause I want it back).

DSC003651.JPG

 

The second rap got us to about 10 ft above the snow slope. Going second, I got to the end, tied off the pull rope to my harness, and let the other slip through the belay device, sending me sailing down into the soft snow and pulling the rope at the same time! I felt so clever :)

 

All in all it was a great outing if not a little hairy considering the lack of protectable ice. We did find decent gear but it required a lot of creativity and excavation. Go check it out! It's a gem with easy access and the added benefit of all your friends watching you suffer as they ski deep pow down the south side.

 

On top

DSC00360.JPG

 

Gear Notes:

6 screws (used 2), stoppers (used several), tri cams (used 2), KB's (used 1), spectre (hell yeah I used it!), hand size mastercams (used 3), chopped pickets (used 2), double 60's. Had we brought the kitchen sink, I'm sure we would have found a marginal placement for it.

Share this post


Link to post
Share on other sites

No way...

 

My bro sent me a picture of the east ridge YESTERDAY and I shit you not, I responded with exactly thus:

 

"Too much snow! Cant climb in that shit."

 

Nicely done. Proved me wrong as I was being wrong.

Share this post


Link to post
Share on other sites

I cut most of my 24" pickets to 18". I find that if the snow is good enough to hold a driven picket anchor then the extra few inches are not meaningful. If it's not, then an 18" deadman is probably not much worse than a 24" one and I don't have the thing hanging low off my harness and banging my knees all day long.

 

But that's just me....

 

And yes...there was WAY too much snow.

Edited by mgetlin

Share this post


Link to post
Share on other sites

Well done fellas. I'm sure if you hit it in just the right conditions (spring freeze/thaw?) it's awesome, but every time I've been up it's real spicy. I'll never go up there without a couple pins and a spectre, that's for sure.

 

Like Ben, I thought about going up there last week, and decided "no way, too much fresh snow and insufficient warming cycles." You're braver than I am!

Share this post


Link to post
Share on other sites

Thanks guys! It really isn't that bad. It's intimidating and time consuming but we really felt like it protected reasonably well. (Or at least that's how I remember it a couple weeks later.) That was definitely the first good spectre I have ever placed!

 

But seriously, go give it a shot. There was decent water ice buried beneath the rime and all it takes is a little patience and creativity. And it's very rewarding to climb it in true winter conditions. Not something everyone gets to see!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×